Nanning AMP-PS bridge deck waterproof coating polymer modified asphalt waterproof coating

Description :

　　Nanning AMP-PSBridge deck waterproof coating Polymer modified asphalt waterproof coating

　　double rainbow AMP-PSBridge deck waterproof coating SH-108

　　Product Manual

　　1、 Product Introduction

　　Shuanghong brand AMP-PS bridge deck waterproof coating is a new type of polymer composite waterproof material. It is a new type of composite bridge deck waterproof coating made from petroleum asphalt as the main raw material, supplemented with surfactants and various chemical additives as auxiliary raw materials, and modified with a high dosage of polymer.

　　2、 Product Details

　　Product Name: Double Rainbow AMP-PS Bridge Deck Waterproof Coating

　　Product Model SH-108

　　Product form: single component, brown black liquid slurry

　　Execute standard JC/T975-2005

　　3、 Product advantages

　　1. The waterproof layer has fast film formation, good waterproof effect, and low price.

　　2. The construction process is simple, and it can be manually painted or mechanically sprayed. Both construction methods can achieve the same effect.

　　3. The waterproof layer has strong adhesion and shear resistance.

　　4. High temperature resistance, corrosion resistance, aging resistance, and long service life.

　　4、 Scope of application

　　The product is specifically designed for waterproofing projects such as highway bridges, urban overpasses, and railway bridges, and is also suitable for waterproofing building roofs, underground, and tunnel projects.

　　5、 Construction technology

　　1. Base preparation

　　(1) The substrate must be sturdy, flat, clean, and free of dust, grease, wax, release agents, and other debris;

　　(2) All small pores and sand holes can be sealed by adding a little water to the sealing king and mixing it into a wet ball shape, then smoothing it out;

　　(3) Before applying the slurry, the substrate can be pre wetted, but there should be no accumulated water.

　　2. Grassroots treatment: The newly constructed concrete shall reach the design strength, and the surface temperature cracks and natural shrinkage cracks shall be basically completed. The surface of the base shall be free of floating dust, dirt, grease, accumulated water, etc., and shall be clean and dry.

　　3. The construction must have complete equipment and good performance.

　　4. Mix the paint evenly before application, and maintain intermittent mixing during construction to prevent sedimentation.

　　5. Before applying a large area of paint, use a small brush to apply 2-3 coats on the treated substrate, and then apply a large area of paint. Generally, it takes 3-6 hours (but not more than 24 hours) depending on the temperature. After the paint is dry, apply the second and third coats until the desired thickness is achieved.

　　VI Precautions

　　1. This product is suitable for use in an environment between 5 ℃ and 35 ℃. During the construction process, it must be protected from rain, hot sunlight, and frost.

　　2. If there is precipitation, it does not affect the quality. Stir well and it can be used normally.

　　3. Material storage: High temperature exposure is strictly prohibited. If the bucket lid is opened, it should be sealed immediately after use; Pay attention to antifreeze at 0 ℃.

　　7、 Reference dosage

　　When the dry film thickness of waterproof membrane is 1mm, the dosage is 1.8kg/m2, and the coating thickness of bridge deck is generally around 0.5mm-0.7mm, with a dosage of 1.0-1.5kg/㎡. The actual dosage depends on the specific substrate conditions.

　　8、 Shelf life:

　　Under normal storage and transportation conditions, the shelf life is one year.

　　9、 Packaging specifications:

　　1. Product specifications

　　50L single component slurry

　　2. Packaging materials

　　The outer packaging is in plastic drums.

AfterSalesService :

• AMPPS waterproof coating