Double Rainbow Acrylic Polymer Concrete Protective Agent for Clear Water Concrete Walls

Description :

　　1productintroduction

　　This product is made of imported polymer synthetic resin lotion through multiple processes. It has good water resistance, alkali resistance, heat resistance and excellent freeze-thaw resistance. It is easy to operate, non-toxic and tasteless. It is mainly used for surface treatment of concrete poured walls and prefabricated building materials to enhance the adhesion and effectiveness between the surface and other decorative materials.

　　IIproductDetails

　　Product name: Acrylic copolymer based concrete protective agent

　　Product Model SH-F02

　　Product form: single component, milky white liquid slurry

　　Execute standard JC/T907-2002

　　3、 Product advantages

　　1. Can effectively improve the hardness of cement mortar and enhance its adhesion with other materials;

　　2. It eliminates the phenomenon of hollowing in the wall in the future, and also has good moisture-proof, anti mold, and anti crack effects;

　　3. This product does not contain harmful substances such as benzene, formaldehyde, etc;

　　4Scope of Application

　　Suitable for compacting indoor concrete, aerated concrete bricks, and the first few layers before applying putty and plastering. Suitable for all new and old cement mortar treatments. The treated walls can be decorated with tiles, latex paint, wallpaper, and wooden wall panels.

　　5construction technology

　　1. Base preparation

　　Remove dirt from the base surface and thoroughly wet the substrate before applying the slurry, but there should be no standing water.

　　2. After diluting the slurry (diluted with water at a ratio of 1:1.5-3), evenly apply it to the surface of the cement concrete using a drum or brush;

　　3. Woolen: Mix 1L of slurry and cement sand in a ratio of 2.5-3.0KG to form a paste, and apply it to the base layer with tools.

　　VI Precautions

　　1. This product is suitable for use in an environment between 5 ℃ and 35 ℃. During the construction process, it must be protected from rain, hot sunlight, and frost.

　　2. The slurry after opening should be used up within 30 minutes, and other covering layers can only be used after the waterproof layer has completely dried and solidified.

　　7Recommended dosage

　　After diluting 1kg of slurry, it can be applied for 5 square meters (twice). The actual dosage depends on the specific substrate conditions.

　　8、 Shelf life:

　　Under normal storage and transportation conditions, the shelf life is one year.

　　9packagingSpecifications:

　　1. Product specifications

　　20L single component slurry

　　50L single component slurry

AfterSalesService :

• Double Rainbow Acrylic Polymer Concrete Protection