Conductive PA66 basic innovative plastic American PX10323-BKNAT thermal conductivity

Description :

　　Conductive PA66 basic innovative plastic American PX10323-BKNAT thermal conductivity

　　Our company supplies raw materials such as PC, ABS, PEI, PBT, PA6, PA66, PPO, etc. for SABIC at favorable prices. You can directly contact Ms. He.

　　Main advantages of PA performance

　　1. High mechanical strength, good toughness, and high tensile and compressive strength. It has higher tensile strength than metals and comparable compressive strength to metals, but its rigidity is not as good as metals. The tensile strength is close to the yield strength, more than twice as high as ABS. It has strong absorption ability for impact and stress vibration, and its impact strength is much higher than that of ordinary plastics, and better than that of formaldehyde resin.

　　2. Outstanding fatigue resistance, the component can maintain its original mechanical strength even after repeated bending. PA is often used in situations where the cyclic fatigue effect is extremely obvious, such as common escalator handrails and new plastic bicycle wheels.

　　3. High softening point and heat resistance (such as nylon 46, high crystalline nylon has a high heat deformation temperature and can be used for a long time at 150 degrees Celsius. PA66, after being reinforced with glass fiber, has a heat deformation temperature of over 250 degrees Celsius)

　　4. Smooth surface, low friction coefficient, and wear resistance. When used as active mechanical components, it has self-lubricating properties, low noise, and can be used without lubricant when the friction is not too high; If lubricants are really needed to reduce friction or help dissipate heat, water, oil, grease, etc. can be chosen. Therefore, as a transmission component, it has a long service life

　　5. Corrosion resistant, highly resistant to alkali and most salt liquids, as well as weak acids, engine oil, gasoline, aromatic compounds, and general solvents. It is inert to aromatic compounds but not resistant to strong acids and oxidants. It can resist the erosion of gasoline, oil, fat, alcohol, weak alkali, etc. and has good anti-aging ability. Can be used as packaging material for lubricants, fuels, etc.

　　6. It has self extinguishing properties, is non-toxic, odorless, has good weather resistance, is inert to biological erosion, and has good antibacterial and anti mold abilities.

　　7. Has excellent electrical performance. Good electrical insulation, nylon has a high volume resistance and high breakdown voltage resistance. It can be used as a power frequency insulation material in dry environments and still has good electrical insulation even in high humidity environments.

　　8. The component is lightweight, easy to dye, and easy to shape. Due to its low melt viscosity, it can flow quickly. Easy to fill the mold, with a high solidification point after filling, it can be quickly shaped, resulting in a short molding cycle and high production efficiency.

AfterSalesService :

• Conductive PA66