PCABS alloy TN 7200 Japanese Emperor
Category:
Rubber and plastic/Plastic alloy/PC/ABS
Model:
Brand:
Japanese Emperor
Retail Price
39.00USD
重量
kg
- Product Description
-
Description :
PC ABS alloy TN 7200 Japanese Emperor
Process conditions for PC/ABS injection molding
Drying treatment must be done before processing. The humidity should be less than 0.04%, and it is recommended to dry under conditions of 90-110 ℃ for 2-4 hours;
The melting temperature is 230~300 ℃;
Mold temperature: 50~100 ℃.
The injection pressure depends on the different plastic parts.
The injection speed should be as high as possible.
Chemical and physical properties: PC/ABS has a comprehensive characteristic of both PC and ABS. For example, the easy processing characteristics of ABS and the excellent mechanical properties and thermal stability of PC. The ratio of the two will affect the thermal stability of PC/ABS materials. The PC/ABS hybrid material also exhibits excellent fluidity. The shrinkage rate is around 0.5%.
AfterSalesService :
Key words:- PCABS alloy
