Qimei ABS PA-707 Taiwan Qimei Ultra High Glossiness, High Rigidity, High Lamp Holder Toy Office Supplies
Category:
Rubber and plastic/General plastic/ABS
Model:
Brand:
Taiwan Qimei
Retail Price
12.00USD
重量
kg
- Product Description
-
Description :
Qimei ABSPA-707 Taiwan Qimei Ultra High Glossiness, High Rigidity, High Lamp Holder Toy Office Supplies
ABSMolding characteristics:
1. Amorphous material, with moderate fluidity and high moisture absorption, must be fully dried. Plastic parts that require a glossy surface must be preheated and dried for a long time at 80-90 degrees Celsius for 3 hours;
2. It is advisable to use high material temperature and high mold temperature, but if the material temperature is too high, it is easy to decompose (decomposition temperature is>270 degrees) For high-precision plastic parts, the mold temperature should be set at 50-60 degrees Celsius for high gloss Heat resistant plastic parts, the mold temperature should be set at 60-80 degrees;
3. To solve the problem of water streaks, it is necessary to improve the flowability of the material by using high material temperature, high mold temperature, or changing the water level;
4. If heat-resistant or flame-retardant materials are formed, plastic decomposition products will remain on the surface of the mold after 3-7 days of production, causing the mold surface to shine. The mold needs to be cleaned in a timely manner, and exhaust positions need to be added to the mold surface.
PA-707 Physical Property Table
Other performance rated value unit IZOD impact strength (1/4") fourteen kg.cm/cm (1/8") two point six ft.lb/in (1/4") two point six ft.lb/in (1/8") fourteen kg.cm/cm Melt flow rate (200 ℃ × 5kg) two point one g/10min bending strength twelve thousand and two hundred lb/in Flexural elasticity 2.9×10 kg/cm 4.1×10 lb/in vicat softening point two hundred and twenty-one ℉ elongation fifteen % Tensile strength five hundred kg/cm vicat softening point one hundred and five ℃ Rockwell hardness one hundred and sixteen R Tensile strength seven thousand and ninety lb/in Heat Deflection Temperature 88(190) ℉ 99(210) ℃ bending strength eight hundred and sixty kg/cm Basic Performance rated value unit Melt flow rate (220 ℃ × 10kg) twenty-five g/10min Physical properties rated value unit Burning rate (File No. E56070 UL&C-UL) 1/16"HB AfterSalesService :
Key words:- Qimei ABS
