Chimei ABS PA-763 Taiwan Chimei injection molded flame-retardant electronic and electrical components
Category:
Rubber and plastic/General plastic/ABS
Model:
Brand:
Taiwan Qimei
Retail Price
22.50USD
重量
kg
- Product Description
-
Description :
Qimei ABSPA-763 Taiwan Qimei flame retardant electronic and electrical components injection molding is generally used for products such as computer casings and accessories, electronic products, and office machines that require compliance with UL94 specifications.
Application areas of ABS:
1. Automotive industry
There are many parts in the automotive industry that are made of aBS or aBS alloy, such as the Santana sedan in Shanghai, which uses aBS 11kg per vehicle, ranking third among the plastics used in automobiles. Among other vehicles, the usage of aBS is also quite astonishing. In 2000, the amount of aBS used in automobiles in China reached 35000 tons, and it is predicted that by 2010, this value will reach 60000 tons. The main components of cars that use aBS, such as the dashboard, are made of PC/aBS as the skeleton, and then covered with PVC/ABS film on the surface. In addition, a large number of car interior decorations use aBS, such as glove boxes and glove compartment assemblies made of heat-resistant aBS, door sill upper and lower decorative parts, water tank face shields made of aBS, and many other parts made of aBS as raw materials.
2. Office machines
Office equipment and machines need to have a beautiful appearance and good hand feel, such as telephone casings, memory casings, as well as computers, fax machines, and copiers that extensively use parts made by aBS.
3. Household appliances
Due to its high gloss and easy formability, as well as low shrinkage rate after molding, aBS has a wide market in home appliances and small appliances, such as televisions. Some manufacturers use flame-retardant aBS for the front and rear shells of large screen televisions, and aBS is also widely used as a raw material in household fax machines, speakers, and VCDs. Many aBS made parts are also used in electric fans, air conditioners, air conditioners, and vacuum cleaners, and kitchen utensils.
4. Toys
Many beautiful toys and combination intelligence development toys can also be made using aBS, and there is also a market for aBS in the communication and broadcasting industries.
PA-763 Physical Property Table
Physical properties rated value unit Flow coefficient (200 ℃, 5kg) two point eight g/10min Specific gravity (23 ℃) one point one nine mechanical properties rated value unit Tensile strength (1/8",6mm/min) three hundred and ninety-five kg/cm (1/8",6mm/min) five thousand and six hundred lb/in Elongation rate (1/8 ", 6mm/min) thirty % bending strength (1/4",2.8mm/min) six hundred and twenty kg/cm (1/4",2.8mm/min) eight thousand and eight hundred lb/in Flexural elasticity (1/4",2.8mm/min) twenty-five thousand kg/cm (1/4",2.8mm/min) three hundred and fifty thousand lb/in IZOD notch impact strength (1/4",23℃) twenty kg-cm/cm (1/4",23℃) three point seven ft-lb/in (1/8",23℃) twenty-four kg-cm/cm (1/8",23℃) four point four ft-lb/in Hardness (1/2 ") ninety-eight R Scale thermal performance rated value unit vicat softening point (1/8",50℃/hr) one hundred and four ℃ (1/8",50℃/hr) one hundred and four ℉ Heat Deflection Temperature (85℃.8hr ,1/4",120℃/hr) 96(85) ℃ (85℃.8hr ,1/4",120℃/hr) 205(185) ℉ Combustion rate (1.6mm) V-0 (2.5mm) 5VB AfterSalesService :
Key words:- Qimei ABS
