PC Japanese Emperor 3110G injection grade spot goods
Category:
Rubber and plastic/engineering plastic/PC
Model:
Brand:
Japanese Emperor
Retail Price
22.00USD
重量
kg
- Product Description
-
Description :
PC Japanese Emperor 3110G injection grade spot goods
PC brands: SABIC, Teijin from Japan, LG from South Korea, Covestro from Germany, Dafeng Petrochemical, Sanyo from South Korea, etc. There are numerous models and complete grades.
If you have any needs, please contact Ms. He directly.
Technora® It is an aromatic polyamide fiber developed by Teijin Group in 1974, which has high strength, chemical resistance, wear resistance, low water absorption and other characteristics, and is compatible with Kevar® launched by DuPont; Products of the same nature, both are leading brands and products in the market, with similar strength characteristics.
White's Boots uses this technology material to create a series that complies with NFPA standards, such as SmokeJumper or HATHORN's Logger. Under the same weight and diameter, Technora® It is 8 times stronger than steel wire and 3 times stronger than fiberglass, nylon, or plastic wire. Therefore, the characteristics of this material, which is both strong and light in thinner car wires, combined with a considerable degree of toughness, high temperature resistance, and chemical corrosion resistance, make the boots made very strong and durable.
The electrical characteristics of Coca Cola are not good, and its temperature resistance can only reach about 300 degrees Celsius (the temperature resistance of Teijin and DuPont is 550 degrees Celsius). This problem mainly affects the production process of wires in two aspects: a. Solder joints are prone to breakage - due to environmental requirements, lead-free solder must now be used, and the instantaneous temperature should generally be around 350-400 degrees Celsius. However, due to the insufficient temperature resistance of Coca Cola, carbonization and disappearance often occur at the solder joints, resulting in poor contact noise or breakage of the headphones During the extrusion process of the wire, there is a certain temperature (depending on the type of adhesive material), which can also cause a qualitative change in the Coca Cola product due to the heat Although Coca Cola usually has good results in single filament tensile testing, its fatigue resistance is not good and the product life is not long If certain wire products pursue "replacement rate" and shorten the product usage time for end customers, then there is a possibility of choosing Coca Cola
AfterSalesService :
Key words:- PC Japanese Emperor
