Reflective mirror material PC from Covestro Germany; Bayer&# 41; 1695 Easy to demold and flow
Category:
Rubber and plastic/engineering plastic/PC
Model:
Brand:
Bayer Germany
Retail Price
36.00USD
重量
kg
- Product Description
-
Description :
Reflective mirror material PC, Germany Covestro (Bayer) 1695, easy to demold and flow
In stock, sufficient supply.
Other models:
PC Basic Innovative Plastics (USA) 141R-701
PC Basic Innovative Plastic (Nansha) 141R-701
PC Basic Innovation Plastic (Shanghai) 141R-701
PC Basic Innovation Plastic (Chongqing) 141R-701
PC Basic Innovation Plastic (Nansha) 143R 80060
PC Germany Covestro (Bayer) 1603
PC Germany Covestro (Bayer) 1695
PC Germany Covestro (Bayer)
PC Germany Covestro (Bayer)
PC Germany Covestro (Bayer) 1800
PC Germany Covestro (Bayer) 1800 (2)
PC Belgium Covestro (Bayer) 1803
PC Belgium Covestro (Bayer) 1803 (2)
PC Germany Covestro (Bayer) 1803 (2)
PC Germany Covestro (Bayer) 1803
PC Germany Covestro (Bayer) 1837
PC material, as one of the five engineering plastics with usage second only to PA, has three major application areas: glass assembly industry, automotive industry, electronics and electrical industry, followed by industrial machinery parts, CDs, civil equipment, computers and other office equipment, medical and health care, film, leisure and protective equipment, etc.
PC materials have excellent and balanced toughness, strength, heat resistance, dimensional stability, and surface glossiness, making them widely used. PC materials have good acid and oil resistance, but are not resistant to alkali, strong acid, or amine or ketone solvents. They are soluble in chlorinated hydrocarbons and aromatic solvents, and long-term immersion in water can easily cause hydrolysis and cracking.
The transparency of pure PC material is about 88-92, the density is 1.20-1.22 g/cm3, the linear expansion rate is 3.8 × 10-6 cm/cm, and the thermal deformation temperature is 130 ℃ (1.82Mpa). After flame retardant modification, PC material can pass the 960 ℃ hot wire test, and it has good strength, toughness, surface appearance, and coloring ability, making it an ideal material for electronic products and household appliances.
Modifying PC through toughening, strengthening, flame retardancy, and alloying can improve its shortcomings of stress cracking and poor flowability in the later stage, as well as further enhance its flame retardant performance, improve material toughness and strength, greatly expanding the application scope of this material
Common 4 types of modified polycarbonate materials (PC)
Product Category Product Specification/Model Product Features Product Usage
Non enhanced PC 310-05/10/30 transparent PC, low/medium/high fluidity electronic product casing and panel
310-ST ultra tough grade PC
310-UV weather resistant PC
Enhanced PC 320-Gxx xx% fiberglass reinforcement, high strength and toughness (10%~30%) for water pump casing, electric meter casing
Handheld devices, display modules
monitor stand
320-GMxx xx% fiberglass and mineral fiber reinforcement, high strength, good surface appearance (10%~30%)
320-GFxx xx% fiberglass reinforcement, flame retardant V0@1.6mm （10%~30%）
320-GFMxx xx% glass fiber, mineral fiber reinforcement, flame retardant V0@1.6mm （10%~30%）
Light shielding grade PC 320M15-LED filled with 15% titanium dioxide, light shielding, weather resistant indicator lights, road signs, light shielding plates
320Gxx LED xx% fiberglass reinforcement, light blocking grade, high strength and toughness (10%~20%)
320GFxx LED xx% fiberglass reinforcement, light blocking grade, V0@1.6mm （10%~20%）
Flame retardant PC 330F-V2 ultra tough grade, flame retardant V2@3.2mm Switch panel, socket
electronic products, etc.
330F ultra tough grade, balanced performance in all aspects, V0@1.6mm
330F-5VA ultra tough grade, flame retardant 5VA, hot wire 960 ℃
330F-GN ultra tough grade, halogen-free flame retardant V0@1.6mm
330F-TR transparent grade, flame retardant V0@3.2mm Electronic and electrical instrument panel
AfterSalesService :
Key words:- Reflective mirror material PC
