Creep resistant PC G-3110PH Japanese Teijin high rigidity
Category:
Rubber and plastic/engineering plastic/PC
Model:
Brand:
Japanese Emperor
Retail Price
26.80USD
重量
kg
- Product Description
-
Description :
Creep resistant PC G-3110PH Japanese Teijin high rigidity
Panlite® G-3110PH Physical Properties Table
Basic Information
Filler/reinforcement material glass fiber reinforcement material, 10% filler by weight
Characteristics: low anisotropy rigidity, high and good creep resistance, excellent appearance
Purpose: Camera Applications
Formal particle
Processing method: Injection molding
Physical properties rated value system of units test method
Density 1.27 g/cm3 ISO 1183
Internal method of shrinkage rate
Vertical flow direction: 4.00 mm 0.40 to 0.60% internal method
Flow direction: 4.00 mm 0.35 to 0.55% internal method
Water absorption rate (23 ° C, 24 hr) 0.16% ISO 62
Mechanical performance rating unit testing method
Tensile modulus 3000 MPa ISO 527-2/1
Tensile stress (fracture) 65.0 MPa ISO 527-2/5
Tensile strain (fracture) 5.0% ISO 527-2/5
Bending modulus 1 3100 MPa ISO 178
Bending stress 2 110 MPa ISO 178
Test method for impact performance rating unit system
Simply supported beam notch impact strength 6.0 kJ/m2 ISO 179
Simply supported beam without notch impact strength 55 kJ/m2 ISO 179
Test method for thermal performance rating unit system
Heat Deflection Temperature
0.45 MPa, Unanealed 130 ° C ISO 75-2/B
1.8 MPa, Unanealed 123 ° C ISO 75-2/A
Vicat softening temperature 134 ° C ISO 306/B50
Linear coefficient of thermal expansion ISO 11359-2
Flow 5.0E-5 cm/cm/° C ISO 11359-2
Horizontal 6.0E-5 cm/cm/° C ISO 11359-2
RTI Elec (1.70 mm) 130 °C UL 746
RTI Imp (1.70 mm) 120 °C UL 746
RTI (1.70 mm) 130 °C UL 74
AfterSalesService :
Key words:- Anti creep PC
