Impact modified PC German Bayer 1837 easy demoulding medium viscosity spot
Category:
Rubber and plastic/engineering plastic/PC
Model:
Brand:
Bayer Germany
Retail Price
36.00USD
重量
kg
- Product Description
-
Description :
Impact modified PC German Bayer 1837 easy demoulding medium viscosity spot
PC Covestro, Shabo Foundation and other models are complete and in stock. You can directly contact Ms. He or Manager Niu!
1、 Product Introduction
Polycarbonate (PC) is one of the five major general-purpose engineering plastics, independently manufactured by Bayer and Ge in the 1950s. Due to its transparency, impact resistance, high temperature resistance, and other characteristics, it has a wide range of applications in various fields such as electronics, automotive, medical, construction, and packaging.
Due to their ability to withstand steam, cleaning agents, heating, and high-dose radiation disinfection without yellowing or physical performance degradation, polycarbonate products are widely used in artificial kidney hemodialysis equipment, as well as other medical devices that require transparent and intuitive operation and repeated disinfection, such as high-pressure injectors, surgical masks, disposable dental appliances, blood oxygenators, blood collection and storage devices, blood separators, etc.
Injection molding is the most important forming method for PC. The products are widely used in various fields such as automobiles, construction, textiles, medical equipment, etc. The product mainly consists of equipment components and is also used for optical discs, optical safety caps, and protective glass.
2、 Product parameters
additive Impact modifier
feature Impact modification
Good demolding performance
Medium viscosity
RoHS compliance RoHS compliance
appearance opaque
Available colors
processing method injection molding
Physical properties rated value system of units test method Density (23 ° C) one point one nine g/cm3 ISO 1183 Apparent density 1 zero point six four g/cm3 ISO 60 Melt flow rate (melt flow rate) (300 ° C/1.2 kg) twelve g/10 min ISO 1133 Dissolved Volume Flow Rate (MVR) (300 ° C/1.2 kg) eleven cm3/10min ISO 1133 shrinkage rate Vertical flow direction 0.60 to 0.80 % ISO 2577 flow direction 0.60 to 0.80 % ISO 2577 Vertical flow direction: 2.00 mm2 zero point seven zero % ISO 294-4 Flow direction: 2.00 mm3 zero point six five % ISO 294-4 water absorption rate ISO 62 Saturation, 23 ° C zero point four zero % ISO 62 Balance, 23 ° C, 50% RH zero point one two % ISO 62 hardness rated value system of units test method Ball pressure hardness one hundred and four MPa ISO 2039-1 mechanical properties rated value system of units test method Tensile modulus (23 ° C) two thousand and two hundred MPa ISO 527-2/1 tensile stress ISO 527-2/50 Surrender, 23 ° C fifty-eight MPa ISO 527-2/50 Fracture, 23 ° C sixty MPa ISO 527-2/50 3、 Product shooting
AfterSalesService :
Key words:- Impact modified PC
