Weather resistant and UV resistant PC, Shanghai Covestro Bayer 2407, low viscosity universal grade
Category:
Rubber and plastic/engineering plastic/PC
Model:
Brand:
Shanghai Covestro
Retail Price
13.20USD
重量
kg
- Product Description
-
Description :
Weather resistant and UV resistant PC, Shanghai Covestro Bayer 2407, low viscosity universal grade
PC Shanghai Covestro Bayer 2407 UV, containing release agent
PC Shanghai Covestro Bayer 2407 Physical Properties Table
Additive UV stabilizer
Low viscosity, good universal demolding performance
General purpose RoHS compliance
Appearance: Translucent and opaque. Available in clear/transparent colors
Processing method: Injection molding
Physical properties rated value system of units test method
Density (23 ° C) 1.20 g/cm3 ISO 1183
Apparent density 1 0.66 g/cm3 ISO 60
Melt flow rate (melt flow rate) (300 ° C/1.2 kg) 20 g/10 min ISO 1133
Dissolved Volume Flow Rate (MVR) (300 ° C/1.2 kg) 19.0 cm3/10 min ISO 1133
shrinkage rate
Vertical flow direction 0.50 to 0.70% ISO 2577
Flow direction 0.50 to 0.70% ISO 2577
Vertical flow direction: 2.00 mm 2 0.70% ISO 294-4
Flow direction: 2.00 mm 3 0.65% ISO 294-4
Water absorption rate ISO 62
Saturation, 23 ° C 0.30% ISO 62
Balance, 23 ° C, 50% RH 0.12% ISO 62
hardness rated value system of units test method
Ball hardness 116 MPa ISO 2039-1
Mechanical performance rating unit testing method
Tensile modulus (23 ° C) 2400 MPa ISO 527-2/1
Tensile stress ISO 527-2/50
Yield, 23 ° C 66.0 MPa ISO 527-2/50
Fracture, 23 ° C 65.0 MPa ISO 527-2/50
Tensile strain ISO 527-2/50
Yield, 23 ° C 6.0% ISO 527-2/50
Fracture, 23 ° C 120% ISO 527-2/50
Nominal tensile fracture strain (23 ° C)>; 50 % ISO 527-2/50
Tensile creep modulus ISO 899-1
1 hr 2200 MPa ISO 899-1
1000 hr 1900 MPa ISO 899-1
Bending modulus 4 (23 ° C) 2350 MPa ISO 178
Bending stress 5 ISO 178
3.5% strain, 23 ° C 74.0 MPa ISO 178
23°C 98.0 MPa ISO 178
Flexural Strain at Flexural Strength (23°C) 6 7.0 % ISO 178
thin film rated value system of units test method
Gas Permeation ISO 2556
Carbon Dioxide : 23°C, 25.4 μm 18900 cm3/m2/bar/24 hr ISO 2556
Carbon Dioxide : 23°C, 100.0 μm 4800 cm3/m2/bar/24 hr ISO 2556
Nitrogen : 23°C, 25.4 μm 630 cm3/m2/bar/24 hr ISO 2556
Nitrogen : 23°C, 100.0 μm 160 cm3/m2/bar/24 hr ISO 2556
Oxygen : 23°C, 25.4 μm 3150 cm3/m2/bar/24 hr ISO 2556
Oxygen : 23°C, 100.0 μm 800 cm3/m2/bar/24 hr ISO 2556
flammability rated value system of units test method
Application of Flame from Small Burner - Method K and F (2.00 mm) K1, F1 DIN 53438-1, -3
Burning Rate - US-FMVSS (> 1.00 mm) passed ISO 3795
Flash Ignition Temperature 480 °C
Needle Flame Test IEC 60695-11-5
Method F : 1.50 mm 1.0 min IEC 60695-11-5
Method F : 2.00 mm 2.0 min IEC 60695-11-5
Method F : 3.00 mm 2.0 min IEC 60695-11-5
Method K : 1.50 mm 0.1 min IEC 60695-11-5
Method K : 2.00 mm 0.1 min IEC 60695-11-5
Method K : 3.00 mm 0.2 min IEC 60695-11-5
Self Ignition Temperature 550 °C
Supplementary information rated value test method
Electrolytical Corrosion (23°C) A1 IEC 60426
ISO Shortname ISO 7391-PC,MLR,(,,)-18-9
thin film rated value system of units test method
Water vapor permeability (23 ° C, 85% RH, 100 μ m) 15 g/m2/24 hr ISO 15106-1
impact performance rated value system of units test method
Simply supported beam notch impact strength 7 ISO 7391
-30 ° C, complete fracture 14 kJ/m2 ISO 7391
23 ° C, local fracture 65 kJ/m2 ISO 7391
Simply supported beam without notch impact strength ISO 179/1eU
-60 ° C without fracture ISO 179/1eU
-30 ° C without fracture ISO 179/1eU
23 ° C without fracture ISO 179/1eU
Suspended wall beam notch impact strength 8 ISO 7391
-30 ° C, complete fracture 12 kJ/m2 ISO 7391
23 ° C, local fracture 65 kJ/m2 ISO 7391
Multi axis Instrumented Impact Energy ISO 6603-2
-30°C 65.0 J ISO 6603-2
23°C 55.0 J ISO 6603-2
Multi axis Instrumented Peak Impact Force ISO 6603-2
-30°C 6000 N ISO 6603-2
23°C 5100 N ISO 6603-2
thermal performance rated value system of units test method
Heat Deflection Temperature
0.45 MPa, Unanealed 136 ° C ISO 75-2/B
1.8 MPa, Unanealed 124 ° C ISO 75-2/A
Glass transition temperature 9 143 ° C ISO 11357-2
Vicat softening temperature
-- 143 °C ISO 306/B50
-- 145 °C ISO 306/B120
Ball Pressure Test (135°C) Pass IEC 60695-10-2
Linear coefficient of thermal expansion ISO 11359-2
Flow: 23 to 55 ° C 6.5E-5 cm/cm/° C ISO 11359-2
Horizontal: 23 to 55 ° C 6.5E-5 cm/cm/° C ISO 11359-2
Thermal conductivity 10 (23 ° C) 0.20 W/m/K ISO 8302
RTI Elec (1.50 mm) 125 °C UL 746
RTI Imp (1.50 mm) 115 °C UL 746
RTI (1.50 mm) 125 °C UL 746
Electrical performance rated value system of units test method
Surface resistivity 1.0E+16 ohms IEC 60093
Volume resistivity (23 ° C) 1.0E+16 ohms · cm IEC 60093
Dielectric strength (23 ° C, 1.00 mm) 34 kV/mm IEC 60243-1
Relative permittivity IEC 60250
23°C, 100 Hz 3.10 IEC 60250
23°C, 1 MHz 3.00 IEC 60250
Dissipation factor IEC 60250
23°C, 100 Hz 5.0E-4 IEC 60250
23°C, 1 MHz 9.0E-3 IEC 60250
Leakage Trace Index IEC 60112
Solution A 250 V IEC 60112
Solution B 125 V IEC 60112
flammability rated value system of units test method
UL flame retardant rating UL 94
2.70 mm HB UL 94
0.750 mm V-2 UL 94
Burning wire flammability index IEC 60695-2-12
0.750 mm 850 °C IEC 60695-2-12
1.50 mm 875 °C IEC 60695-2-12
3.00 mm 930 °C IEC 60695-2-12
Hot filament ignition temperature IEC 60695-2-13
0.750 mm 875 °C IEC 60695-2-13
1.00 mm 875 °C IEC 60695-2-13
1.50 mm 875 °C IEC 60695-2-13
3.00 mm 875 °C IEC 60695-2-13
Extreme Oxygen Index 11 27% ISO 4589-2
optical performance rated value system of units test method
Refractive index 12 1.584 ISO 489
Transmittance ISO 13468-2
1000 μm 89.0 % ISO 13468-2
2000 μm 89.0 % ISO 13468-2
3000 μm 88.0 % ISO 13468-2
4000 μm 87.0 % ISO 13468-2
Haze (3000 μ m)<; 0.80 % ISO 14782
AfterSalesService :
Key words:- Weather resistant and UV resistant PC
