PC UV resistant Shanghai Covestro ET3113 550115 high viscosity sheet material
Category:
Rubber and plastic/engineering plastic/PC
Model:
Brand:
Shanghai Bayer
Retail Price
15.50USD
重量
kg
- Product Description
-
Description :
PC UV resistant Shanghai Covestro ET3113 550115 high viscosity sheet material
PC Covestro, SABIC and other models are complete and in stock. You can directly contact Ms. He or Manager Niu
1、 Product Introduction
As a high-performance material, PC has several significant characteristics: high transparency, light weight, strong impact resistance, high temperature resistance, and resistance to deformation, which make it widely used in many fields. From an industry perspective, she is optimistic about the potential applications of PC in the automotive, electronic and electrical, and medical fields.
In the automotive industry, almost all car light components are currently made of PC, and some applications are in automotive parts such as instrument panels and other interior components. She told reporters that currently, the more high-end the car, the greater the amount of PC used, because the characteristics of PC will greatly improve the texture of the car. The reason why we are optimistic about the potential application of PC in the automotive industry is based on the energy-saving and environmental protection trends of the automotive industry. PC has good transparency, with a relative density only half that of glass, but its strength is several hundred times that of glass, even surpassing tempered glass. According to relevant data, replacing glass with PC for car window materials can significantly reduce vehicle weight, energy consumption, and environmental impact. In addition, PC also gives designers higher freedom, and car windows are no longer limited to square shapes, and the use of sunroofs will be more widespread.
In the electronics and electrical industry, many equipment casings and components require good flame retardancy and excellent weather resistance, as the temperature changes in the usage environment of these applications are significant, and PC materials can fulfill this responsibility. There are also Internet related topics, including the 5G network actively invested by China. The application of 5G networks will have new requirements for materials, and PCs can demonstrate their skills in this regard.
2、 Product parameters
additive UV stabilizer
feature Viscosity, high
purpose Waveform board
sheet material
RoHS compliance RoHS compliance
appearance Available colors
Clear/Transparent
processing method extrude
Physical properties rated value system of units test method Density (23 ° C) one point two zero g/cm3 ISO 1183 Apparent density 1 zero point six six g/cm3 ISO 60 Melt flow rate (melt flow rate) (300 ° C/1.2 kg) six point five g/10 min ISO 1133 Dissolved Volume Flow Rate (MVR) (300 ° C/1.2 kg) six cm3/10min ISO 1133 shrinkage rate Vertical flow direction 0.60 to 0.80 % ISO 2577 flow direction 0.60 to 0.80 % ISO 2577 Vertical flow direction: 2.00 mm2 zero point seven five % ISO 294-4 Flow direction: 2.00 mm3 zero point seven zero % ISO 294-4 water absorption rate ISO 62 Saturation, 23 ° C zero point three zero % ISO 62 Balance, 23 ° C, 50% RH zero point one two % ISO 62 hardness rated value system of units test method Ball pressure hardness one hundred and thirteen MPa ISO 2039-1 mechanical properties rated value system of units test method Tensile modulus (23 ° C) two thousand three hundred and fifty MPa ISO 527-2/1 tensile stress ISO 527-2/50 Surrender, 23 ° C sixty-five MPa ISO 527-2/50 Fracture, 23 ° C seventy MPa ISO 527-2/50 tensile strain ISO 527-2/50 Surrender, 23 ° C six point three % ISO 527-2/50 Fracture, 23 ° C one hundred and thirty % ISO 527-2/50 Nominal tensile fracture strain (23 ° C) > 50 % ISO 527-2/50 Tensile creep modulus ISO 899-1 1 hr two thousand and two hundred MPa ISO 899-1 1000 hr one thousand and nine hundred MPa ISO 899-1 Bending modulus 4 (23 ° C) two thousand three hundred and fifty MPa ISO 178 Bending stress 5 ISO 178 3.5% strain, 23 ° C seventy-two MPa ISO 178 23°C ninety-six MPa ISO 178 Flexural Strain at Flexural Strength (23°C) 6 seven point two % ISO 178 3、 Product shooting
AfterSalesService :
Key words:- PC UV resistant
