Weather resistant PC PC-108U Taiwan Chi Mei flame retardant sun visor
Category:
Rubber and plastic/engineering plastic/PC
Model:
Brand:
Taiwan Qimei
Retail Price
21.50USD
重量
kg
- Product Description
-
Description :
PC-108U Taiwan Qimei
Features include:
Flame retardant/rated flame
Obtained ROHS certification
UV stabilization
board; Sun visor;
PC-108U Physical Property Table
Basic Information
Yellow card number E56070-100269748
E56070-100239150
Additive UV stabilizer
RoHS Compliance RoHS Compliance
Processing method: Extrusion
injection molding
Physical performance rating unit testing method
Specific gravity 1.20 g/cm3 ASTM 792, ISO 1183
Melt flow rate (300 ° C/1.2 kg) 8.0 g/10 min ASTM 1238
Dissolved Volume Flow Rate (MVR) (300 ° C/1.2 kg) 6.50 cm3/10 min ISO 1133
Shrinkage rate ASTM 955
Flow rate of 0.50 to 0.70% ASTM 955
Lateral flow 0.50 to 0.70% ASTM 955
Water absorption rate (23 ° C, 24 hr) 0.20% ASTM 570
Test method for hardness rating unit system
Rockwell hardness (M grade) 77 ASTM 785
Ball indentation hardness (H 358/30) 100 MPa ISO 2039-1
Mechanical performance rating unit testing method
tensile strength
Yield, 3.18 mm 1 61.8 MPa ASTM 638
Yield 65.0 MPa ISO 527-2/50
Fracture 75.0 MPa ISO 527-2/50
elongation
Yield, 3.18 mm 2 6.0% ASTM 638
Fracture, 3.18 mm 3 110% ASTM 638
Fracture 120% ISO 527-2/50
flexural modulus
6.35 mm 4 2350 MPa ASTM 790
-- 5 2400 MPa ISO 178
bending strength
6.35 mm 6 90.2 MPa ASTM 790
-- 7 90.0 MPa ISO 178
Compressive strength 76.5 MPa ASTM 695
Test method for impact performance rating unit system
The impact strength of a simply supported beam with a notch is 75 kJ/m2 according to ISO 179
Impact strength of cantilever beam gap
3.18 mm 880 J/m ASTM 256
-- 80 kJ/m2 ISO 180/1A
Test method for thermal performance rating unit system
Thermal deformation temperature under load
0.45 MPa, Unanealed 8 136 ° C ASTM 648
1.8 MPa, Unanealed 9 125 ° C ASTM 648
1.8 MPa, Unanealed 127 ° C ISO 75-2/A
1.8 MPa, Annealing at 142 ° C ISO 75-2/A
Vicat softening temperature
-- 148 °C ASTM 1525, ISO 306/A50 7 10
-- 143 °C ISO 306/B50
Linear coefficient of thermal expansion - Flow (44 to 100 ° C) 6.0E-5 to 8.0E-5 cm/cm/° C ASTM 696
Thermal conductivity 0.20 W/m/K ASTM C177
Test method for unit system of rated electrical performance values
Volume resistivity 3.0E+16 ohms · cm ASTM 257
Dielectric strength (1.60 mm) 30 kV/mm ASTM 149
Dielectric constant ASTM 150
60 Hz 2.95 ASTM 150
1 MHz 2.90 ASTM 150
Dissipation factor ASTM 150
60 Hz 4.0E-4 ASTM 150
1 MHz 9.0E-3 ASTM 150
Arc resistance 11 110 sec ASTM 495
Test method for flammability rating unit system
UL flame retardant rating UL 94
1.50 mm HB UL 94
3.00 mm HB UL 94
Test method for optical performance rating unit system
Refractive index 1.585 ASTM 542
Transmittance (76200 μ m) 88.0% ASTM 1003
Haze (81300 μ m)<; 0.80 % ASTM 1003
Injection rated value unit system
Drying temperature 120 ° C
Drying time 4.0 hours
The temperature at the back of the barrel is 230 to 300 ° C
The temperature in the middle of the barrel is 250 to 320 ° C
The temperature at the front of the barrel ranges from 250 to 310 ° C
Mold temperature 70.0 to 120 ° C
AfterSalesService :
Key words:- Weather resistant PC
