Halogen free flame retardant PC PC-6600 Taiwan Chi Mei Electric Appliances Automotive Industry
Halogen free flame retardant PC PC-6600 Taiwan Chi Mei Electric Appliances Automotive Industry

Halogen free flame retardant PC PC-6600 Taiwan Chi Mei Electric Appliances Automotive Industry

Category:

Rubber and plastic/engineering plastic/PC

Model:

Brand:

Taiwan Qimei

Retail Price

22.50USD


重量

kg

  • Product Description
  • Description :

      PC PC-6600 Taiwan Chi Mei

      Characteristics: Flame retardant and halogen-free

      Usage: In the field of electrical/electronic applications; Large and small household appliances; Applications in the automotive field

      PC-6600 Physical Property Table

    Basic Information
    Yellow card number

      E114

      

    feature

      halogen-free

      flame retardancy

      

    RoHS compliance

      RoHS compliance

      

    appearance

      translucent

      

    processing method

      injection molding

      

    Physical properties rated value system of units test method
    specific gravity one point two zero g/cm3 ASTM 792
    Melt flow rate (melt flow rate) (300 ° C/1.2 kg) ten g/10 min ASTM 1238
    Shrinkage rate - flow (3.20 mm) 0.50 to 0.70 % ASTM 955
    hardness rated value system of units test method
    Rockwell hardness (R grade, 23 ° C) one hundred and twenty-two ASTM 785
    mechanical properties rated value system of units test method
    Tensile strength 1 (yield) sixty-one point eight MPa ASTM 638
    Elongation rate 2 (fracture) one hundred % ASTM 638
    Bending modulus 3 two thousand three hundred and fifty MPa ASTM 790
    Bending strength 4 ninety point two MPa ASTM 790
    impact performance rated value system of units test method
    Impact strength of cantilever beam gap (23 ° C, 0.125 mm) seven hundred and eighty J/m ASTM 256
    thermal performance rated value system of units test method
    Hot deformation temperature under load 5 (1.8 MPa, unannealed) one hundred and twenty-five °C ASTM 648
    Vicat softening temperature one hundred and forty-three °C ASTM
    flammability rated value test method
    UL flame retardant rating (1.10 mm) V-0 UL 94
    injection rated value system of units
    drying temperature one hundred and twenty °C
    drying time four hr
    Temperature at the rear of the barrel 270 to 300 °C
    Temperature in the middle of the barrel 270 to 300 °C
    Temperature at the front of the material cylinder 270 to 300 °C
    mold temperature 70.0 to 100 °C

    AfterSalesService :

    Key words:
    • Halogen free flame retardant PC