20% fiberglass reinforced PC 9425 Shanghai Kesichuang high viscosity flame retardant

Description :

　　PC 9425 Shanghai Covestro

　　MVR (300 ° C/1.2 kg) 5.0cm3/10 minutes; 20% glass fiber reinforcement; Not flammable; UL 94V-0/1.5mm and 5VA/3.0mm; High viscosity is easy to release; Injection molding - melt temperature 310-330 ° C; extrusion; Containing release agent

　　9425 Physical Property Table

　　Basic Information

　　Yellow card number E41613-233166

　　E41613-233167

　　Filler/reinforcement material glass fiber reinforcement material, 20% filler by weight

　　Additive flame retardancy

　　Good demolding performance

　　Viscosity, high

　　flame retardancy

　　RoHS Compliance RoHS Compliance

　　Opaque appearance

　　Available colors

　　Processing method: Extrusion

　　injection molding

　　Multi point data Creep Module vs. Time (ISO 11403-1)

　　Isochronous Stress vs. Strain (ISO 11403-1)

　　Isothermal Stress vs. Strain (ISO 11403-1)

　　Secant Modulus vs. Strain (ISO 11403-1)

　　Shear Modulus vs. Temperature (ISO 11403-1)

　　Viscosity vs. Shear Rate (ISO 11403-2)

　　Physical performance rating unit testing method

　　Density (23 ° C) 1.34 g/cm3 ISO 1183

　　Apparent density 1 0.64 g/cm3 ISO 60

　　Melt flow rate (melt flow rate) (300 ° C/1.2 kg) 6.0 g/10 min ISO 1133

　　Dissolved Volume Flow Rate (MVR) (300 ° C/1.2 kg) 5.00 cm3/10 min ISO 1133

　　shrinkage rate

　　Vertical flow direction 0.30 to 0.50% ISO 2577

　　Flow direction 0.30 to 0.50% ISO 2577

　　Vertical flow direction: 2.00 mm 2 0.45% ISO 294-4

　　Flow direction: 2.00 mm 3 0.35% ISO 294-4

　　Water absorption rate ISO 62

　　Saturation, 23 ° C 0.24% ISO 62

　　Balance, 23 ° C, 50% RH 0.10% ISO 62

　　Test method for hardness rating unit system

　　Ball hardness 148 MPa ISO 2039-1

　　Mechanical performance rating unit testing method

　　Tensile modulus (23 ° C) 5800 MPa ISO 527-2/1

　　Tensile stress (fracture, 23 ° C) 86.0 MPa ISO 527-2/5

　　Tensile strain (fracture, 23 ° C) 2.6% ISO 527-2/5

　　Tensile creep modulus ISO 899-1

　　1 hr 5700 MPa ISO 899-1

　　1000 hr 5200 MPa ISO 899-1

　　Bending modulus 4 (23 ° C) 5500 MPa ISO 178

　　Bending stress 5 (23 ° C) 135 MPa ISO 178

　　Flexural Strain at Flexural Strength (23°C) 6 3.5 % ISO 178

　　Test method for flammability rating unit system

　　Application of Flame from Small Burner

　　2.00 mm B2 DIN 4102

　　Method K and F : 2.00 mm K1, F1 DIN 53438-1, -3

　　Burning Rate - US-FMVSS (> 1.00 mm) passed ISO 3795

　　Flash Ignition Temperature 470 °C ASTM 1929

　　Needle Flame Test IEC 60695-11-5

　　Method F : 1.50 mm 2.0 min IEC 60695-11-5

　　Method F : 2.00 mm 2.0 min IEC 60695-11-5

　　Method F : 3.00 mm 2.0 min IEC 60695-11-5

　　Method K : 1.50 mm 1.0 min IEC 60695-11-5

　　Method K : 2.00 mm 2.0 min IEC 60695-11-5

　　Method K : 3.00 mm 2.0 min IEC 60695-11-5

　　Self Ignition Temperature 550 °C ASTM 1929

　　Supplementary Information Rating Test Method

　　Electrolytical Corrosion (23°C) A1 IEC 60426

　　ISO Shortname ISO 7391-PC,MFR,(,,)-05-3,GF20

　　Test method for impact performance rating unit system

　　The impact strength of a simply supported beam with a notch of 7 (23 ° C, completely fractured) is 8.0 kJ/m2 according to ISO 7391

　　Simply supported beam without notch impact strength ISO 179/1eU

　　-60 ° C, complete fracture 50 kJ/m2 ISO 179/1eU

　　-30 ° C, complete fracture 50 kJ/m2 ISO 179/1eU

　　two

AfterSalesService :

• Glass fiber reinforced PC