PC 121R American Basic Innovation Plastic Low viscosity Easy demolding
Category:
Rubber and plastic/engineering plastic/PC
Model:
Brand:
Basic Innovative Plastics&# 40; United States&# 41
Retail Price
13.20USD
重量
kg
- Product Description
-
Description :
PC 121R American Basic Innovation Plastic Low viscosity Easy demolding
LEXAN? 121R resin polycarbonate
LEXAN? 121R Resin Physical Properties Table
Basic Information: Additive Demoulding
Characteristics: low viscosity, processability, good
Appearance semi transparent, opaque, available colors clear/transparent
Processing method: Injection molding
Physical performance rating unit testing method
Density 1.20 g/cm3 ISO 1183
Dissolved Volume Flow Rate (MVR) (300 ° C/1.2 kg) 21.0 cm3/10 min ISO 1133
Shrinkage rate - Flow rate of 0.50 to 0.70% Internal method
Water absorption rate ISO 62
Saturation, 23 ° C 0.35% ISO 62
Balance, 23 ° C, 50% RH 0.15% ISO 62
Test method for hardness rating unit system
Ball indentation hardness (H 358/30) 95.0 MPa ISO 2039-1
Mechanical performance rating unit testing method
Tensile modulus 2350 MPa ISO 527-2/1
Tensile stress ISO 527-2/50
Yield 63.0 MPa ISO 527-2/50
Fracture at 65.0 MPa ISO 527-2/50
Tensile strain ISO 527-2/50
Yield 6.0% ISO 527-2/50
Fracture 100% ISO 527-2/50
Bending modulus 2 2300 MPa ISO 178
Bending stress 90.0 MPa ISO 178
Taber Wear Resistance (1000 Cycles, 1000 g, CS-17 Wheel) 10.0 mg Internal Method
Test method for impact performance rating unit system
Charpy Notched Impact Strength
-30°C 3 12 kJ/m2 ISO 179/1eA
23°C 4 65 kJ/m2 ISO 179/1eA
23°C 35 kJ/m2 ISO 179/2C
Simply supported beam without notch impact strength 5 ISO 179/1eU
-30 ° C without fracture ISO 179/1eU
23 ° C without fracture ISO 179/1eU
Suspended wall beam notch impact strength 6 ISO 180/1A
-30°C 11 kJ/m2 ISO 180/1A
23°C 65 kJ/m2 ISO 180/1A
Unscented Izod impact strength 7 ISO 180/1U
-30 ° C without fracture ISO 180/1U
23 ° C without fracture ISO 180/1U
Test method for thermal performance rating unit system
Hot deformation temperature 8
0.45 MPa, Unanealed, 100mm span 133 ° C ISO 75-2/Be
1.8 MPa, Unanealed, 100 mm span 122 ° C ISO 75-2/Ae
Vicat softening temperature
-- 140 °C ISO 306/B50
-- 141 °C ISO 306/B120
Ball Pressure Test (125°C) Pass IEC 60695-10-2
Linear expansion coefficient - transverse (23 to 80 ° C) 7.0E-5 cm/cm/° C ISO 11359-2
Thermal conductivity 0.20 W/m/K ISO 8302
RTI Elec 130 °C UL 746
RTI Imp 125 °C UL 746
RTI 125 °C UL 746
AfterSalesService :
Key words:- PC 121R
