Low temperature resistant PC GP-1006FH Guangzhou LG impact resistant good processability
Low temperature resistant PC GP-1006FH Guangzhou LG impact resistant good processability

Low temperature resistant PC GP-1006FH Guangzhou LG impact resistant good processability

Category:

Rubber and plastic/engineering plastic/PC

Model:

Brand:

Guangzhou LG

Retail Price

30.00USD


重量

kg

  • Product Description
  • Description :

      PC GP-1006FH Guangzhou LG

      Performance characteristics of GP-1006FH Guangzhou LG:

      1. Good transparency, with a light transmittance of 90%, making it a transparent material with better heat resistance than PMMA (140 ° C);

      2. Good low temperature resistance, can be used for a long time at -100 ° C-140 ° C;

      3. Outstanding impact resistance, creep resistance, and dimensional stability; Outstanding impact resistance, creep resistance, and dimensional stability;

      4. Good electrical insulation at a wide temperature range (-100-140 ° C) and a wide frequency range (60-10106Hz); Good electrical insulation at a wide temperature range (100~℃) and a wide frequency range (Hz); Good electrical insulation;

      5. Good processability (injection, extrusion, blowing, salivation, compression, etc.)

      GP-1006FH Physical Properties Table

    Physical properties rated value unit test method
    specific gravity one point two one g/cm ASTM 792
    Melt flow rate (300 ℃/1.2kg) eleven g/10min ASTM 238
    Molding shrinkage rate (flow) 0.50-0.80 % ASTM 955
    hardness rated value unit test method
    Rockwell hardness (R-scale) one hundred and eighteen ASTM 785
    mechanical properties rated value unit test method
    Tensile strength (yield, 25 ℃) fifty-nine point two MPa ASTM 638
    Elongation (fracture) one hundred % ASTM 638
    flexural modulus two thousand one hundred and seventy MPa ASTM 790
    bending strength eighty-eight point eight MPa ASTM 790
    Impact strength of cantilever beam gap (-10 ℃, 3.18mm) sixty-five J/m ASTM 256
    (23℃,3.18mm) six hundred and eighty-six J/m ASTM 256
    thermal performance rated value unit test method
    Hot deformation temperature (1.8MPa, unannealed) one hundred and twenty-nine ASTM 648
    flammability rated value unit test method
    UL flame retardant rating (1.00mm) V-0 UL 94

    AfterSalesService :

    Key words:
    • Low temperature resistant PC