Computer component PC GN1008RF Guangzhou LG impact resistant and flame retardant
Category:
Rubber and plastic/engineering plastic/PC
Model:
Brand:
Guangzhou LG
Retail Price
40.00USD
重量
kg
- Product Description
-
Description :
PC GN1008RF Guangzhou LG
GN1008RF is a polycarbonate (PC) material,. This product is available in North America, Latin America, Europe, or the Asia Pacific region, and is processed by injection molding.
The main characteristics of GN1008RF are:
Flame retardant/rated flame
Flame Retardant
impact resistance
halogen-free
The typical application areas of GN1008RF are: electrical/electronic applications
GN1008RF Physical Properties Table
Basic Information
Yellow card number E67171-100068057
E302314-100644077
E248280-100213954
E353371-101107271
Additive flame retardancy
Characteristic impact resistance, high
halogen-free
flame retardancy
Usage: Computer Components
Electrical/Electronic Application Fields
Processing method: Injection molding
Physical performance rating unit testing method
Specific gravity 1.19 g/cm3 ASTM 792
Melt flow rate (300 ° C/1.2 kg) 18 g/10 min ASTM 1238
Shrinkage Flow (3.20 mm) 0.50 to 0.70% ASTM 955
Mechanical performance rating unit testing method
Tensile strength 1 (yield, 3.20 mm) 59.8 MPa ASTM 638
Elongation 2 (fracture, 3.20 mm) 100% ASTM 638
Bending modulus 3 (3.20 mm) 2350 MPa ASTM 790
Bending strength 4 (3.20 mm) 91.2 MPa ASTM 790
Test method for impact performance rating unit system
Suspended wall beam notch impact strength (23 ° C, 3.20 mm) 780 J/m ASTM 256
Test method for thermal performance rating unit system
Hot deformation temperature under load (1.8 MPa, unannealed, 6.40 mm) 101 ° C ASTM 648
RTI Elec 80.0 °C UL 746
RTI Imp 80.0 °C UL 746
RTI 80.0 °C UL 746
Flammability rating test method
UL flame retardant rating UL 94
0.400 mm V-2 UL 94
0.600 mm V-0 UL 94
0.800 mm V-0 UL 94
3.00 mm V-0 UL 94
Injection rated value unit system
Drying temperature 85.0 to 95.0 ° C
Drying time 3.0 to 5.0 hours
Suggested moisture content 0.040%
The temperature at the rear of the barrel is 245 to 260 ° C
The temperature in the middle of the barrel is 260 to 275 ° C
The temperature at the front of the barrel is 265 to 280 ° C
Spray nozzle temperature 270 to 285 ° C
Processing (melt) temperature 245 to 285 ° C
Mold temperature 70.0 to 90.0 ° C
Back pressure ranging from 0.981 to 1.96 MPa
Screw speed 40 to 70 rpm
AfterSalesService :
Key words:- Computer components PC
