Wear resistant transparent PC GN1006FM Guangzhou LG flame retardant injection molded electronic and electrical
Wear resistant transparent PC GN1006FM Guangzhou LG flame retardant injection molded electronic and electrical

Wear resistant transparent PC GN1006FM Guangzhou LG flame retardant injection molded electronic and electrical

Category:

Rubber and plastic/engineering plastic/PC

Model:

Brand:

Guangzhou LG

Retail Price

21.50USD


重量

kg

  • Product Description
  • Description :

      PC GN1006FM Guangzhou LG

      Specification level: Flame retardant injection molding

      Product Usage: Electrical/Electronic Application Field

      Note: Halogen free, clear/transparent

      Low moisture absorption; wear-resisting; V-0; lubricity; V-2; V-1; Low friction coefficient;

      Bearing; Liner; Mining applications; Gear; Construction application field; Gasket; Wear resistant strip;

      GN1006FM Physical Properties Table

    Physical properties rated value unit test method
    specific gravity one point two zero g/cm ASTM 792
    Melt flow rate (300 ℃/1.2kg) ten g/10min ASTM 1238
    Molding shrinkage rate (flow, 3.20mm) 0.50-0.70 % ASTM 955
    hardness rated value unit test method
    Rockwell hardness (R-scale) one hundred and eighteen ASTM 785
    mechanical properties rated value unit test method
    Tensile strength (yield, 3.20mm) sixty-one point eight MPa ASTM 638
    Elongation (fracture, 3.20mm) one hundred % ASTM 638
    Bending modulus (3.20mm) two thousand two hundred and sixty MPa ASTM 790
    Bending strength (yield, 3.20mm) ninety-one point two MPa ASTM 790
    Impact strength of cantilever beam gap (23 ℃, 3.20mm) seven hundred and sixteen J/m ASTM 256
    thermal performance rated value unit test method
    Hot deformation temperature (0.45MPa, unannealed, 6.40mm) one hundred and thirty ASTM 648
    Vicat softening temperature one hundred and forty-one ASTM 1525
    Electrical performance rated value unit test method
    Volume resistivity (23 ℃) 2.0E+17 ohm·cm ASTM 257
    flammability rated value unit test method
    UL flame retardant rating (1.50mm) V-2 UL 94
    UL 94
    (2.50mm,Black) V-0
    (2.50mm,Red) V-0
    (2.50mm,White) V-0
    (3.00mm) V-0
    UL746 rated value unit test method
    RTI Str one hundred and twenty UL 746
    RTI lmp one hundred and ten UL 746
    RTI Elec one hundred and twenty UL 746

    AfterSalesService :

    Key words:
    • Wear resistant transparent PC