COC APL6013T Mitsui Bottle from Japan
Category:
Rubber and plastic/engineering plastic/COC
Model:
Brand:
Mitsui Chemicals, Japan
Retail Price
75.00USD
重量
kg
- Product Description
-
Description :
COC APL6013T Mitsui Bottle from Japan
For a long time, China's COC/COP market has been mainly monopolized by foreign giants, and the required products are basically dependent on imports. From a global perspective, Japan is the main supplier of COC/COP, with major manufacturing companies including Zeonex, APEL, and TOPAS.
In recent years, with the continuous increase in research and development efforts and the improvement of independent research and development capabilities of COC/COP in China, some enterprises in China have already possessed the potential for industrialization of COC/COP. For example, Akoli and other enterprises are gradually expanding into the transparent optical material market. The company has completed the trial production acceptance and project equipment construction of an annual output of 5000 tons of COC/COP products.
Overall, the COC/COP market has a high level of attention, and China's COC/COP new materials field is already on the road, with a large space for domestic substitution and a promising future.
APEL APL6013T Physical Properties Table
Basic Information purpose bottle
form particle
Physical properties rated value system of units test method specific gravity one point zero four g/cm3 ASTM 792 Melt flow rate (melt flow rate) (260 ° C/2.16 kg) fifteen g/10 min ASTM 1238 Shrinkage rate - flow zero point six zero % ASTM 955 mechanical properties rated value system of units test method Tensile strength (yield) sixty MPa ASTM 638 Elongation (fracture) three % ASTM 638 flexural modulus three thousand MPa ASTM 790 bending strength one hundred and ten MPa ASTM 790 thin film rated value system of units test method Water vapor permeability zero point zero nine zero g·mm/m2/atm/24 hr ASTM F1249 impact performance rated value system of units test method Impact strength of cantilever beam gap twenty-five J/m ASTM 256 thermal performance rated value system of units test method Hot deformation temperature under load (1.8 MPa, unannealed) one hundred and fifteen °C ASTM 648 Glass transition temperature one hundred and twenty-five °C SC optical performance rated value system of units test method refractive index one point five four zero ASTM 542 transmittance ninety % ASTM 1003 haze three % ASTM 1003 AfterSalesService :
Key words:- COC APL6013T
