COC 330R Japan Rayon Optical New Material Lens Special Material
COC 330R Japan Rayon Optical New Material Lens Special Material

COC 330R Japan Rayon Optical New Material Lens Special Material

Category:

Rubber and plastic/engineering plastic/COC

Model:

Brand:

Japanese Ryoon

Retail Price

75.00USD


重量

kg

  • Product Description
  • Description :

      COC 330R Japan Rayon Optical New Material Lens Special Material

      ZEONEX® 330R Physical Property Table

    feature

      Low Specific Gravity

      Good dimensional stability

      High purity

      Low hygroscopicity

      copolymer

      optical performance

      Good electrical performance

      Good chemical resistance

      Heat resistance, high

      

    purpose

      Electrical/Electronic Application Fields

      Electronic insulation

      Optical Applications

      lens

      Camera applications

      Medical packaging

      

    appearance

      Clear/Transparent

      

    processing method

      injection molding

      

    Physical properties rated value system of units test method
    specific gravity zero point nine four eight g/cm3 ASTM 792
    Melt flow rate (melt flow rate) (260 ° C/2.16 kg) eleven g/10 min ISO 1133
    Water absorption rate (equilibrium) < 0.010 % ASTM 570
    hardness rated value system of units test method
    Pencil Hardness 3H JIS K5401
    injection rated value system of units
    Injection Velocity 30.0 to 80.0 cm3/s
    Screw Speed 20 to 60 rpm
    mechanical properties rated value system of units test method
    tensile stress forty-five MPa ISO 527-2
    Tensile strain (fracture) three % ISO 527-2
    flexural modulus three thousand and one hundred MPa ISO 178
    bending stress ninety-one MPa ISO 178
    impact performance rated value system of units test method
    Impact strength of cantilever beam gap (3.20 mm) thirteen J/m ASTM 256
    thermal performance rated value system of units test method
    Hot deformation temperature under load (1.8 MPa, unannealed) one hundred and three °C AST648
    Glass transition temperature one hundred and twenty-three °C JIS K7121
    Linear coefficient of thermal expansion - flow 7.0E-5 cm/cm/°C ASTM E831
    Electrical performance rated value system of units test method
    volume resistivity > 1.0E+16 ohms·cm IEC 60093
    Dielectric strength 1 (1.00 mm) forty kV/mm ASTM 149
    Dielectric constant (1 MHz) two point three zero IEC 60250
    Dissipation factor (1 MHz) 4.0E-4 IEC 60250
    flammability rated value system of units test method
    UL flame retardant rating HB UL 94
    optical performance rated value system of units test method
    refractive index one point five zero nine ASTM 542
    Transmittance (3000 μ m) ninety-two % ASTM 1003

    AfterSalesService :

    Key words:
    • COC 330R