High temperature resistant PSU E3010 German BASF high viscosity flame-retardant automotive parts
Category:
Rubber and plastic/engineering plastic/PSU
Model:
Brand:
BASF Germany
Retail Price
150.00USD
重量
kg
- Product Description
-
Description :
High temperature resistant PSU E3010 German BASF flame retardant injection molding extrusion
Application: Electronic and electrical applications, automotive interior parts, automotive exterior parts
Good toughness, high viscosity, chemical resistance, V-0
The scientific name of polyoxymethylene is polyoxymethylene (POM), also known as Saigang or Trang. It is obtained by polymerizing formaldehyde and other raw materials. POM-H (polyoxymethylene homopolymer) and POM-K (polyoxymethylene copolymer) are high-density and highly crystalline thermoplastic engineering plastics. Has good physical, mechanical, and chemical properties, especially excellent friction resistance.
Polyoxymethylene is a linear polymer without side chains, high density, and high crystallinity, with excellent comprehensive properties.
Polyoxymethylene is a hard and dense material with a smooth and glossy surface, light yellow or white, and can be used for a long time in the temperature range of -40-100 ° C. Its wear resistance and self-lubricating properties are superior to most engineering plastics, and it also has good oil and peroxide resistance. Not resistant to acid, strong alkali, and moonlight ultraviolet radiation.
The tensile strength of polyoxymethylene reaches 70MPa, with low water absorption, stable size, and luster. These properties are better than nylon. Polyoxymethylene is a highly crystalline resin and is the strongest among thermoplastic resins. It has high heat resistance, bending strength, fatigue resistance, excellent wear resistance, and electrical performance.
E3010 Physical Property Table
Physical properties rated value unit test method density one point five three g/cc ISO 1183 water absorption rate one point seven % ISO 62 Melt flow rate thirty-five g/10min ISO 1133 mechanical properties rated value unit test method tensile strength one hundred and eighty-six Mpa ISO 527 Elongation at break three point one % ISO 527 tensile modulus seven point five Gpa ISO 527 flexural modulus six point seven nine Gpa bending strength one hundred and eighty-seven Mpa CHARPY notch impact strength zero point six five J/cm ISO 179 Electrical performance rated value unit test method volume resistivity >= 1.00e+13 Ohm.cm IEC 60093 surface resistivity 1.00e+14 Ohm IEC 60093 dielectric constant four point two IEC 60250 dielectric strength forty-two KV/mm IEC 60243-1 Dielectric loss factor zero point zero zero two IEC 60112 thermal performance rated value unit test method Heat Deflection Temperature ISO 75 (0.45Mpa) two hundred and twenty-four ℃ (1.8Mpa) two hundred and twelve ℃ vicat softening point two hundred and seventeen ℃ ISO 306 flame retardancy V-0 UL94 Biochemical properties rated value unit test method Oxygen index forty-four % ISO 4589-1/-2 AfterSalesService :
Key words:- High temperature resistant PSU
