High flow PPO 100Z modified PPE from Asahi Kasei, Japan
Category:
Rubber and plastic/engineering plastic/PPO
Model:
Brand:
Asahi Kasei, Japan
Retail Price
20.00USD
重量
kg
- Product Description
-
Description :
1、 Product Introduction
Polyoxyxylene is one of the inexpensive high-temperature resistant plastics, but it is difficult to manufacture and its impact and heat resistance will decrease over time. Mixing polyoxymethylene and polystyrene can improve this drawback. In the 1960s, adjusted polyethylene glycol was introduced under the trade name Noryl. The commonly used material in the market is modified polyphenylene oxide (MPPO), also known as MPPE (Modified Polyphenylene Ether).
Performance: High flow flame retardant modified PPE;
Usage: Automotive field, electrical appliances, electronics, daily life
Material Properties
1. Mechanical properties
PPO has outstanding mechanical properties, being hard and tough, especially in terms of tensile strength, impact strength, and creep resistance.
2. Thermal properties
PPO has high heat resistance, with a thermal deformation temperature of up to 190 ℃ for pure PPO, 120 ℃ for long-term use, and 205 ℃ for short-term use.
3. Electrical properties
PPO has excellent electrical properties, with relatively low dielectric constant and dielectric loss tangent, making it suitable for the preparation of PCB substrate materials.
4. Chemical properties
PPO has good chemical corrosion resistance and is stable to oleic acid, alkali, and salts. It can expand in fatty and aromatic hydrocarbons such as ethyl acetate, acetone, and gasoline. PPO has poor antioxidant properties and requires the addition of phosphate ester antioxidants.
2、 Physical property table
100Z Physical Property Table
Basic Information
Yellow card number E82268-250850
Good liquidity characteristics
Processing method: Injection molding
Physical performance rating unit testing method
Density 1.08 g/cm3 ISO 1183
Shrinkage rate 1 (2.00 mm) 0.50 to 0.70% internal method
Water absorption rate (23 ° C, 24 hr) 0.10% ISO 62
Mechanical performance rating unit testing method
Tensile stress (yield, 23 ° C) 37.0 MPa ISO 527-2
Nominal tensile fracture strain (23 ° C) 30% ISO 527-2
Bending modulus (23 ° C) 2370 MPa ISO 178
Bending stress (23 ° C) 66.0 MPa ISO 178
Test method for impact performance rating unit system
Simply supported beam notch impact strength 2 (23 ° C) 16 kJ/m2 ISO 179
Test method for thermal performance rating unit system
Thermal deformation temperature under load
1.8 MPa, Unanealed at 85.0 ° C ASTM 648
1.8 MPa, Unanealed 78.0 ° C ISO 75-2/A
Linear coefficient of thermal expansion - Flow (-30 to 65 ° C) 8.0E-5 cm/cm/° C ISO 11359-2
Test method for unit system of rated electrical performance values
Surface resistivity 1.0E+16 ohms IEC 60093
Volume resistivity (23 ° C) 1.0E+16 ohms · cm IEC 60093
Dielectric strength 3 (2.00 mm) 29 kV/mm IEC 60243-1
Dielectric constant IEC 60250
100 Hz 2.90 IEC 60250
1 MHz 2.90 IEC 60250
Dissipation factor IEC 60250
100 Hz 3.0E-3 IEC 60250
1 MHz 4.0E-3 IEC 60250
Test method for flammability rating unit system
UL flame retardant rating UL 94
1.45 mm V-0 UL 94
3.00 mm 5VA UL 94
Injection rated value unit system
Drying temperature 70.0 to 80.0 ° C
Drying time 2.0 to 4.0 hours
Processing (melt) temperature 220 to 270 ° C
Mold temperature 40.0 to 70.0 ° C
3、 Product shooting
4、 Buyer Notice
1. Guarantee. Our products are all original factory packaged, with affordable prices for first tier sources.
2. Safety. Due to love, purchasing cannot be done online. Customers can do it on Alibaba. Safe and reassuring. (Our company's Alibaba 12 Year Integrity Certification)
3. Fast delivery. If the goods are available, they can be shipped on the same day. The bulk order will be shipped within 3 days, and specific details can be agreed upon.
4. Formal invoice. 13% value-added tax invoice can be issued.
5. Material certification. Provide original factory property tables, SGS certification, yellow card UL, ROHS reports, MSDS, and more.
AfterSalesService :
Key words:- High flow PPO
