Corrosion resistant PEEK based innovative plastic LF100-12 from the United States

Description :

　　Corrosion resistant PEEK based innovative plastic LF100-12 from the United States

　　Introduction to the Characteristics of Polyether Ether Ketone PEEK

　　Polyether ether ketone has the heat resistance, chemical stability, and molding processability of thermosetting plastics and thermoplastic plastics. Polyether ether ketone also has excellent heat resistance. Its thermal deformation temperature is 160 ℃, and when reinforced with 20% to 30% glass fiber, the thermal deformation temperature can be increased to 280-300 ℃. Polyether ether ketone has good thermal stability at 420 ℃ in air. At 2 hours, the weight loss is only 2%, and at 500 ℃ it is 2.5%. Significant thermal weight loss only occurs at 500 ℃. The long-term use temperature of polyetheretherketone is about 200 ℃, at which it can still maintain high tensile strength and bending modulus. It is also a very strong material with excellent long-term creep resistance and fatigue resistance.

　　High speed and high pressure injection: Plastic has high viscosity and fast cooling speed. Long process parts require low pressure and slow speed, which cannot completely fill every corner of the mold cavity; For parts with too thin wall thickness, the molten material is prone to condensation and retention when it reaches the thin wall. Therefore, a high-speed injection must be used to immediately enter the mold cavity before a large amount of molten material energy is consumed; Plastic reinforced with glass fiber or containing a large amount of filling material, due to poor fluidity, must be injected at high speed and high pressure in order to obtain smooth and uniform surface parts.

　　Buyer Notice:

　　1. Quality assurance. Our products are all original factory packaged, sourced from first tier sources, and priced affordably.

　　2. Safety. Public accounts are safe and reliable. (Our company's Alibaba 12 Year Integrity Certification)

　　3. Fast delivery. If the goods are available, they can be shipped on the same day. The bulk order will be shipped within 3 days, and specific details can be agreed upon.

　　4. Formal invoice. 13% value-added tax invoice can be issued.

　　5. Material certification. Provide original factory property tables, SGS certification, yellow card UL, ROHS reports, MSDS, and more.

　　6. Sample testing. We can provide sample testing for customers to improve the success rate of trial production.

　　The application of PEEK is very extensive, in addition to common PEEK rods, plates, etc., it is also widely used in fields such as automobiles and electronics.

AfterSalesService :

• Corrosion resistant PEEK