Low ion content PEEK based innovative plastic LL004C wear-resistant PTFE lubricant
Category:
Rubber and plastic/engineering plastic/PEEK
Model:
Brand:
American liquid nitrogen
Retail Price
670.00USD
重量
kg
- Product Description
-
Description :
Low ion content PEEK based innovative plastic LL004C wear-resistant PTFE lubricant
1、 Product Introduction
PEEK is an aromatic crystalline thermoplastic polymer material. Its melting point is 334 ℃ and it has the following attractive characteristics:
1. Short term heat resistance: After being reinforced with glass fiber or carbon fiber, its thermal deformation temperature can reach over 300 ℃.
2. Long term heat resistance: The UL temperature index (RTI) is 250 ℃.
3. Resilience: It is a very flexible resin.
4. Flame retardancy: reaches UL94V-0 level (1.5mm), has self extinguishing properties, and produces the least amount of smoke during combustion among all resins.
5. Corrosion resistance/chemical resistance: No solvents other than concentrated sulfuric acid can corrode it.
6. Hot water resistance (can be used in steam at 200-300 ℃).
7. Fatigue resistance and creep resistance (high among thermoplastic materials);
8. Processing formability: In addition to injection molding, it can also be applied to various molding methods.
2、 Physical property table
additive PTFE lubricant
feature Low (to None) Ion Content
lubrication
Physical properties rated value system of units test method specific gravity one point three seven g/cm3 ASTM 792, ISO 1183 shrinkage rate Flow: 24 hours one point three % ASTM 955 Lateral flow: 24 hours one point nine % ASTM 955 Vertical flow direction: 24 hours one point nine % ISO 294-4 Flow direction: 24 hours one point three % ISO 294-4 mechanical properties rated value system of units test method tensile modulus -- 1 two thousand and nine hundred MPa ASTM 638 -- three thousand and seventy MPa ISO 527-2/1 tensile strength yield seventy-four point five MPa ASTM 638 yield seventy-three MPa ISO 527-2 fracture sixty-nine point six MPa ASTM 638 fracture sixty-nine MPa ISO 527-2 elongation yield five point eight % ASTM 638 yield five % ISO 527-2 fracture twenty-three % ASTM 638 fracture twelve % ISO 527-2 3、 Product shooting
4、 Buyer Notice
1. Quality assurance. Our products are all original factory packaged, sourced from first tier sources, and priced affordably.
2. Safety. Public accounts are safe and reliable. (Our company's Alibaba 12 Year Integrity Certification)
3. Fast delivery. If the goods are available, they can be shipped on the same day. The bulk order will be shipped within 3 days, and specific details can be agreed upon.
4. Formal invoice. 13% value-added tax invoice can be issued.
5. Material certification. Provide original factory property tables, SGS certification, yellow card UL, ROHS reports, MSDS, and more.
6. Sample testing. We can provide sample testing for customers to improve the success rate of trial production.
PEEK based innovative plastic (USA) LL004C injection grade
AfterSalesService :
Key words:- Low ion content PEEK
