Polyphenylene sulfide PPS Singapore Chevron Philip R-4-230BL glass fiber reinforced 40%
Category:
Rubber and plastic/engineering plastic/PPS
Model:
Brand:
Chevron Phillips, USA
Retail Price
53.00USD
重量
kg
- Product Description
-
Description :
Polyphenylene sulfide PPS Singapore Chevron Philip R-4-230BL glass fiber reinforced 40%
1、 Product Introduction
Polyphenylene sulfide (PPS) is an important emerging environmentally friendly chemical material, widely used in fields such as electronics and electrical appliances, automotive industry, mechanical and chemical industry, aerospace, textile industry, and new products. With the continuous growth of market demand, there has been a supply gap for polyphenylene sulfide products in China, especially for high-end products such as fiber grade, film grade, and low chlorine injection grade resins with huge demand.
In the future, the market application areas of the polyphenylene sulfide industry will further expand, but competition will become increasingly fierce. Core technology, high-end products, and low cost will be the focus of enterprise competition.
2、 Physical property table
Filler/reinforcement material Glass fiber reinforced material, 40% filler by weight
feature Processability, good
purpose Applications in the automotive field
RoHS compliance RoHS compliance
appearance black
form particle
processing method injection molding
Physical properties rated value system of units test method specific gravity one point six eight g/cm3 ASTM 792 shrinkage rate Flow: 3.20 mm zero point two zero % Lateral flow: 3.20 mm zero point five zero % Water absorption rate (23 ° C, 24 hours) zero point zero two zero % ASTM 570 hardness rated value system of units test method Rockwell hardness ASTM 785 M-grade one hundred and four ASTM 785 R-grade one hundred and twenty-two ASTM 785 mechanical properties rated value system of units test method tensile strength -- one hundred and sixty-five MPa ASTM 638 -- one hundred and forty-five MPa ISO 527-2 elongation fracture one point two % ASTM 638 fracture one point one % ISO 527-2 flexural modulus -- MPa ASTM 790 -- MPa ISO 178 bending strength -- two hundred and twenty-one MPa ASTM 790 -- two hundred and ten MPa ISO 178 compressive strength two hundred and seventy-five MPa ASTM 695 Poisson's ratio zero point four three impact performance rated value system of units test method Impact strength of cantilever beam gap 3.18 mm eighty J/m ASTM 256 -- eight kJ/m2 ISO 180/A Non notched cantilever beam impact 3.18 mm four hundred J/m ASTM 4812 -- twenty kJ/m2 ISO 180 thermal performance rated value system of units test method Hot deformation temperature under load (1.8 MPa, unannealed) two hundred and sixty-five °C ASTM 648 
AfterSalesService :
Key words:- Polyphenylene sulfide PPS
