High strength PPS Singapore Chevron Philips R-4-200BL glass fiber reinforced 40%
Category:
Rubber and plastic/engineering plastic/PPS
Model:
Brand:
Chevron Phillips, USA
Retail Price
55.00USD
重量
kg
- Product Description
-
Description :
High strength PPS Singapore Chevron Philips R-4-200BL glass fiber reinforced 40%
1、 Product Introduction
Ryton® R-4-200BL polyphenylene sulfide 40% glass fiber reinforced material; Ryton® R-4-200NA and R-4-200BL 40% glass fiber reinforced polyphenylene sulfide compounds provide improved mechanical strength and low maintenance molding using conventional molding equipment.
2、 Physical property table
Filler/reinforcement material Glass fiber reinforced material, 40% filler by weight
feature Good strength
purpose Applications in the automotive field
RoHS compliance RoHS compliance
appearance black
form particle
processing method injection molding
Physical properties rated value system of units test method specific gravity one point six eight g/cm3 ASTM 792 shrinkage rate Flow: 3.20 mm zero point two zero % Lateral flow: 3.20 mm zero point five zero % Water absorption rate (23 ° C, 24 hours) zero point zero two zero % ASTM 570 hardness rated value system of units test method Rockwell hardness ASTM 785 M-grade one hundred ASTM 785 R-grade one hundred and twenty ASTM 785 mechanical properties rated value system of units test method tensile strength -- one hundred and seventy-nine MPa ASTM 638 -- one hundred and eighty-five MPa ISO 527-2 Elongation (fracture) one point five % ASTM 638, ISO 527-2 flexural modulus -- MPa ASTM 790 -- MPa ISO 178 bending strength -- two hundred and fifty-five MPa ASTM 790 -- two hundred and sixty MPa ISO 178 compressive strength two hundred and seventy-five MPa ASTM 695 Poisson's ratio zero point four zero ISO 527 impact performance rated value system of units test method Impact strength of cantilever beam gap 3.18 mm eighty J/m ASTM 256 -- eight kJ/m2 ISO 180/A Non notched cantilever beam impact 3.18 mm five hundred and thirty J/m ASTM 4812 -- thirty-five kJ/m2 ISO 180 thermal performance rated value system of units test method Hot deformation temperature under load (1.8 MPa, unannealed) two hundred and sixty-five °C ASTM 648 
AfterSalesService :
Key words:- High strength PPS
