Low temperature impact resistant PPA AT-1001L American Amoco ski boots and ice hockey shoes

Description :

　　1、 Product Introduction

　　PPA (Polyphthalamide) has a tensile strength that is 20% higher than nylon 6 and higher than nylon 66 under high temperature and high humidity conditions; The bending modulus of PPA material is 20% higher than that of nylon, with greater hardness and the ability to resist long-term tensile creep; Moreover, PPA has stronger resistance to gasoline, grease, and coolant than PA; A high-temperature resistant nylon material that can withstand sustained high temperatures up to 200 ℃ and maintain good dimensional stability.

　　Characteristics and Applications: AT-1001L is an unreinforced impact modified polyphthalamide (PPA) resin that exhibits excellent impact strength at low temperatures ranging from room temperature to -40 ° F (-40 ° C), indicating its potential use in ski boots and ice hockey shoes. In addition, its chemical resistance, wear resistance, and excellent mechanical properties make Amodel® AT-1001L resin has become a major candidate product for anti-wear and wear-resistant components, chemical, oilfield, automotive, and safety equipment applications.

　　BASF explained that Ultramid Advanced N5H has narrowed the market gap between semi-finished products made from polyetheretherketone (PEEK) and polyarylsulfone (PAS) and parts made from engineering plastics. Compared to the latter, it can be used at continuous operating temperatures much higher than 120 ℃. Besides rods, BASF materials are also suitable for other profiles.

　　Bernhard Grosskinsky, Head of Application Technology at Gehr Geir, stated, "Compared to other PPAs in the market, BAFS' PPA is easier to handle. It provides us with a wide processing range and high melt stability. The quality of materials remains constant, so we can maintain stable production of semi-finished parts. Another advantage of BASF PPA is that it can easily produce finished components from semi-finished products through semi processing

　　Gehr has used the new Ultramid Advanced N5H in a range of applications, including components with high operating temperatures, pump parts that require precise dimensional stability, gears, thermostat housings, and slides. In the automotive industry, this material is suitable for components that come into contact with engine and transmission oil, coolant, acid, salt, and de icing fluid.

　　2、 Physical property table

　　AT-1001L Physical Properties Table

　　Physical performance rating unit testing method

　　Density 1.11 g/cm3 ISO 1183/A

　　Shrinkage rate ASTM 955

　　Flow 1.7 to 2.2% ASTM 955

　　Lateral flow 1.9 to 2.1% ASTM 955

　　Water absorption rate (24 hours) 0.75% ASTM 570

　　Mechanical performance rating unit testing method

　　Tensile modulus 1900 MPa ASTM 638

　　Tensile strength (fracture) 62.1 MPa ASTM 638

　　Elongation rate ASTM 638

　　Yield 6.0% ASTM 638

　　Fracture 30% ASTM 638

　　Bending modulus 2210 MPa ASTM 90

　　Bending strength 96.5 MPa ASTM 790

　　Poisson's ratio 0.35 ASTM E132

　　Test method for impact performance rating unit system

　　Suspended wall beam notch impact strength ASTM 256

　　-40°C 750 J/m ASTM 256

　　23°C 1100 J/m ASTM 256

　　Test method for thermal performance rating unit system

　　Hot deformation temperature under load (1.8 MPa, annealed, 3.18 mm) 120 ° C ASTM 648

　　Melting temperature 310 ° C

　　3、 Product shooting

　　4、 Buyer Notice

　　1. Quality assurance. Our products are all original factory packaged, sourced from first tier sources, and priced affordably.

　　2. Safety. Public accounts are safe and reliable. (Our company's Alibaba 12 Year Integrity Certification)

　　3. Fast delivery. If the goods are available, they can be shipped on the same day. The bulk order will be shipped within 3 days, and specific details can be agreed upon.

　　4. Formal invoice. 13% value-added tax invoice can be issued.

　　5. Material certification. Provide original factory property tables, SGS certification, yellow card UL, ROHS reports, MSDS, and more.

　　6. Sample testing. We can provide sample testing for customers to improve the success rate of trial production.

　　PPA has higher thermal stability than PA46;

　　PPA has better CTI/arc resistance and infrared current sharing ability than PA46;

　　PPA has better chemical resistance than PA46;

AfterSalesService :

• Low temperature impact resistant PPA