Conductive PES ESD C 1480 American RTP electrostatic discharge protection flame retardant

Description :

　　1、 Product Introduction

　　Polyether sulfone resin, a chemical raw material, is a transparent amber colored amorphous resin with excellent heat resistance, dimensional stability, and good chemical resistance. In addition, PES exhibits excellent reliability against rapid temperature changes and has good reliability for long-term use at high temperatures. The excellent formability and properties of PES make it widely used.

　　2、 Physical property table

　　RTP ESD C 1480 Physical Property Table

　　Basic Information

　　Filler/Reinforcement Material Carbon Fiber Reinforced Material

　　Characteristic conductivity

　　Electrostatic discharge protection

　　RoHS Compliance Contact Manufacturers

　　Processing method: Injection molding

　　Physical performance rating unit testing method

　　Specific gravity 1.39 g/cm3 ASTM 792

　　Shrinkage Flow (3.20 mm) 0.20% ASTM 955

　　Moisture content 0.040%

　　Test method for unit system of rated electrical performance values

　　Static Decay sec FTMS 101C 4046.1

　　Mechanical performance rating unit testing method

　　Tensile modulus 6890 MPa ASTM 638

　　Tensile strength 124 MPa ASTM 638

　　Elongation (yield) 1.0 to 2.0% ASTM 638

　　Bending modulus 6210 MPa ASTM 790

　　Bending strength 179 MPa ASTM 790

　　Test method for impact performance rating unit system

　　Suspended wall beam notch impact strength (3.20 mm) 53 J/m ASTM 256

　　Notchless cantilever beam impact (3.20 mm) 480 J/m ASTM 4812

　　Test method for thermal performance rating unit system

　　Hot deformation temperature under load (1.8 MPa, unannealed) 216 ° C ASTM 648

　　Test method for unit system of rated electrical performance values

　　surface resistivity

　　-- < 1.0E+6 ohms ASTM 257

　　-- < 1.0E+5 ohms ESD STM11.11

　　Volume resistivity<1.0E+3 ohms · cm ASTM 257

　　Test method for flammability rating unit system

　　UL flame retardant rating (1.50 mm, * * Values per RTP Company testing.) V-0 UL 94

　　Injection rated value unit system

　　Drying temperature 149 ° C

　　Drying time 6.0 hours

　　Dew Point -31.7 °C

　　Processing (melt) temperature 343 to 377 ° C

　　Mold temperature 135 to 177 ° C

　　Injection pressure ranging from 68.9 to 103 MPa

　　3、 Product shooting

　　4、 Buyer Notice

　　1. Guarantee. Our products are all original factory packaged, sourced from first tier sources, and priced affordably.

　　2. Safety. Public accounts are safe and reliable. (Our company's Alibaba 12 Year Integrity Certification)

　　3. Fast delivery. If the goods are available, they can be shipped on the same day. The bulk order will be shipped within 3 days, and specific details can be agreed upon.

　　4. Formal invoice. 13% value-added tax invoice can be issued.

　　5. Material certification. Provide original factory property tables, SGS certification, yellow card UL, ROHS reports, MSDS, and more.

　　6. Sample testing. We can provide sample testing for customers to improve the success rate of trial production.

　　PES material, chemical name polyether sulfone, has a colorless appearance, high transparency, high temperature resistance, and milk abrasion resistance. It is of higher quality than PP material bottles, but not comparable to PPSU material bottles. worse off than some, better off than many.

　　PPSU material, chemical name is polystyrene sulfone, with a light golden color on the surface. This material is of higher quality than the other two materials, with a high temperature resistance of up to 180 degrees, and can be repeatedly disinfected without producing harmful ingredients. PES milk bottles have high stability, are not easily deformed, and are corrosion-resistant.

AfterSalesService :

• Conductive PES