Lubrication PES 1403NL American RTP 20% fiberglass reinforced flame retardant V-0

Description :

　　1、 Product Introduction

　　Polyether sulfone resin, a chemical raw material, is a transparent amber colored amorphous resin with excellent heat resistance, dimensional stability, and good chemical resistance. In addition, PES exhibits excellent reliability against rapid temperature changes and has good reliability for long-term use at high temperatures. The excellent formability and properties of PES make it widely used.

　　2、 Physical property table

　　RTP 1403 N L Physical Properties Table

　　Basic Information

　　Filler/reinforcement material glass fiber reinforcement material, 20% filler by weight

　　Additive lubricant

　　Characteristic lubrication

　　RoHS Compliance Contact Manufacturers

　　Appearance black

　　natural color

　　Formal particle

　　Processing method: Injection molding

　　Physical performance rating unit testing method

　　Specific gravity 1.50 g/cm3 ASTM 792

　　Shrinkage Flow (3.18 mm) 0.20% ASTM 955

　　Water absorption rate (23 ° C, 24 hr) 0.40% ASTM 570

　　Test method for hardness rating unit system

　　Rockwell hardness (R grade) 122 ASTM 785

　　Mechanical performance rating unit testing method

　　Tensile modulus 6890 MPa ASTM 638

　　Tensile strength 131 MPa ASTM 638

　　Elongation (at break) 3.0% ASTM 638

　　Bending modulus 6890 MPa ASTM 790

　　Bending strength 190 MPa ASTM 790

　　Compressive strength 138 MPa ASTM 695

　　Test method for impact performance rating unit system

　　Suspended wall beam notch impact strength (3.18 mm) 80 J/m ASTM 256

　　Notchless cantilever beam impact (3.18 mm) 640 J/m ASTM 4812

　　Test method for thermal performance rating unit system

　　Hot deformation temperature under load (1.8 MPa, unannealed) 210 ° C ASTM 648

　　Linear coefficient of thermal expansion - Flow 3.4E-5 cm/cm/° C ASTM 696

　　Test method for unit system of rated electrical performance values

　　Volume resistivity 1.0E+16 ohms · cm ASTM 257

　　Test method for flammability rating unit system

　　UL flame retardant rating V-0 UL 94

　　Supplementary information

　　Mold Shrinkage, Linear-Flow, ASTM -955, 0.25in.: 3mil/in.

　　Injection rated value unit system

　　Drying temperature 149 ° C

　　Drying time 6.0 hours

　　Suggested moisture content 0.040%

　　Suggested recycling ratio of 20%

　　The temperature at the rear of the barrel is 343 to 399 ° C

　　The temperature in the middle of the barrel ranges from 343 to 399 ° C

　　The temperature at the front of the barrel ranges from 343 to 399 ° C

　　Mold temperature 121 to 177 ° C

　　Injection pressure ranging from 103 to 138 MPa

　　Locking force 6.9 to 11 kN/cm2

　　3、 Product shooting

　　4、 Buyer Notice

　　1. Guarantee. Our products are all original factory packaged, sourced from first tier sources, and priced affordably.

　　2. Safety. Public accounts are safe and reliable. (Our company's Alibaba 12 Year Integrity Certification)

　　3. Fast delivery. If the goods are available, they can be shipped on the same day. The bulk order will be shipped within 3 days, and specific details can be agreed upon.

　　4. Formal invoice. 13% value-added tax invoice can be issued.

　　5. Material certification. Provide original factory property tables, SGS certification, yellow card UL, ROHS reports, MSDS, and more.

　　6. Sample testing. We can provide sample testing for customers to improve the success rate of trial production.

　　The medical equipment and food processing machinery fields mainly utilize their sterilization methods such as steam sterilization, dry steaming (180 ℃) sterilization, V-ray sterilization, and their ability to withstand repeated disinfection. The main products developed include contact lens sterilizers, dental drill handles, surgical containers, syringes, valves and tubes for the food industry

　　Due to its good adhesion to metals such as iron and lead, as well as high surface hardness, PES polyether sulfone and polytetrafluoroethylene can be formulated into non stick coatings with excellent corrosion resistance, radiation resistance, insulation performance, flame retardancy, non toxicity, particularly good adhesion to metals, and low friction. Widely used in industries such as kitchen utensils, household appliances, light industrial hardware, industrial molds, plastic machinery, etc.

AfterSalesService :

• Lubricate PES