Stress resistant fracture PES 3600G, Sumitomo Chemical High Flow Resistant, Japan
Category:
Rubber and plastic/engineering plastic/PES
Model:
Brand:
Sumitomo Chemical Corporation of Japan
Retail Price
136.00USD
重量
kg
- Product Description
-
Description :
1、 Product Introduction
Polyether sulfone resin, a chemical raw material, is a transparent amber colored amorphous resin with excellent heat resistance, dimensional stability, and good chemical resistance. In addition, PES exhibits excellent reliability against rapid temperature changes and has good reliability for long-term use at high temperatures. The excellent formability and properties of PES make it widely used.
2、 Physical property table
PES 3600G Physical Properties Table
Basic Information
Yellow card number E54705-100988574
E249884-100961987
Good stability of characteristic dimensions
High ESCR (Stress Cracking Resistance)
Impact resistance, good
Good creep resistance
High liquidity
Good chemical resistance
Oil resistance to gasoline
Heat resistance, high
Oil resistance performance
flame retardancy
Formal particle
Processing method: Injection molding
Physical performance rating unit testing method
Specific gravity 1.37 g/cm3 ASTM 792
Shrinkage rate ASTM 955
Flow 0.60% ASTM 955
Lateral flow 0.60% ASTM 955
Water absorption rate (24 hours) 0.43% ASTM 570
Test method for hardness rating unit system
Rockwell hardness (R grade) 120 ASTM 785
Mechanical performance rating unit testing method
Tensile strength 84.0 MPa ASTM 638
Elongation (at break) 60% ASTM 638
Bending modulus 2550 MPa ASTM 790
Bending strength 129 MPa ASTM 790
Test method for impact performance rating unit system
Suspended wall beam notch impact strength (6.40 mm) 85 J/m ASTM 256
Non notched cantilever beam impact (6.40 mm) without fracture ASTM 256
Test method for thermal performance rating unit system
Hot deformation temperature under load (1.8 MPa, unannealed) 203 ° C ASTM 648
Linear thermal expansion coefficient ASTM 696
Flow: -50 to 150 ° C 5.5E-5 cm/cm/° C ASTM 696
Horizontal: 50 to 150 ° C 5.7E-5 cm/cm/° C ASTM 696
Test method for unit system of rated electrical performance values
Volume resistivity 1.0E+17 ohms · cm ASTM 257
Arc resistance 70.0 sec ASTM 495
Test method for flammability rating unit system
UL flame retardant rating (0.460 mm) V-0 UL 94
Injection rated value unit system
The temperature at the rear of the barrel is 300 to 330 ° C
The temperature in the middle of the barrel is 330 to 360 ° C
The temperature at the front of the barrel is 330 to 360 ° C
Spray nozzle temperature 330 to 360 ° C
Processing (melt) temperature 350 to 360 ° C
Mold temperature 120 to 150 ° C
Injection pressure 98.0 to 137 MPa
Injection speed is moderate to fast
Maintain pressure between 49.0 and 68.6 MPa
Back pressure ranging from 4.90 to 9.80 MPa
Screw speed 50 to 60 rpm
3、 Product shooting
4、 Buyer Notice
1. Guarantee. Our products are all original factory packaged, sourced from first tier sources, and priced affordably.
2. Safety. Public accounts are safe and reliable. (Our company's Alibaba 12 Year Integrity Certification)
3. Fast delivery. If the goods are available, they can be shipped on the same day. The bulk order will be shipped within 3 days, and specific details can be agreed upon.
4. Formal invoice. 13% value-added tax invoice can be issued.
5. Material certification. Provide original factory property tables, SGS certification, yellow card UL, ROHS reports, MSDS, and more.
6. Sample testing. We can provide sample testing for customers to improve the success rate of trial production.
PES resin not only has excellent heat resistance and mechanical properties, but also has good processing performance. It can be extruded, injected, molded, blow molded, vacuum formed, and made into foam. It can also be used for secondary processing such as coating, ultrasonic fusion, mechanical processing, solvent bonding, and coating
AfterSalesService :
Key words:- Stress resistant fracture PES
