Laser printer COC Japan Rayon E48R heat-resistant optical lens
Laser printer COC Japan Rayon E48R heat-resistant optical lens

Laser printer COC Japan Rayon E48R heat-resistant optical lens

Category:

Rubber and plastic/engineering plastic/COC

Model:

Brand:

Japanese Ryoon

Retail Price

178.00USD


重量

kg

  • Product Description
  • Description :

      Laser printer COC Japan Rayon E48R heat-resistant optical lens

      Other models:

      COC Japan RAON 330R

      COC Japan Rui Weng 340R

      COC Japan Rion 480M

      COC Japan Rion 480R

      COC Japan Rion 480S

      ZEONEX® E48R Physical Property Table

      Basic Information

      Characteristics: Low Specific Gravity, Good Dimensional Stability, High Purity, Low Moisture Absorption

      Co polymer, optical properties, good electrical properties, and excellent chemical resistance

      Heat resistance, high

      Usage: Electrical/electronic applications, electronic insulation, optical applications, lenses, camera applications, medical packaging

      Clear/transparent appearance

      Processing method: Injection molding

      Physical performance rating unit testing method

      Specific gravity 1.01 g/cm3 ASTM 792

      Melt flow rate (280 ° C/2.16 kg) 25 g/10 min ISO 1133

      Water absorption rate (equilibrium)<0.010% ASTM 570

      Test method for hardness rating unit system

      Pencil Hardness H JIS K5401

      Injection rated value unit system

      Injection Velocity 30.0 to 80.0 cm3/s

      Screw Speed 20 to 60 rpm

      Mechanical performance rating unit testing method

      Tensile modulus 2500 MPa ISO 527-2

      Tensile stress 71.0 MPa ISO 527-2

      Tensile strain (fracture) 10% ISO 527-2

      Bending modulus 2500 MPa ISO 178

      Bending stress 104 MPa ISO 178

      Test method for impact performance rating unit system

      Suspended wall beam notch impact strength (3.20 mm) 21 J/m ASTM 256

      Test method for thermal performance rating unit system

      Hot deformation temperature under load (1.8 MPa, unannealed) 122 ° C ASTM 648

      Glass transition temperature 139 ° C JIS K7121

      Linear coefficient of thermal expansion - Flow 6.0E-5 cm/cm/° C ASTM E831

      Test method for unit system of rated electrical performance values

      Volume resistivity>1.0E+16 ohms · cm IEC 60093

      Dielectric strength 1 (1.00 mm) 40 kV/mm ASTM 149

      Dielectric constant (1 MHz) 2.30 IEC 60250

      Dissipation factor (1 MHz) 2.0E-4 IEC 60250

    AfterSalesService :

    Key words:
    • COC of laser printer