Fiberglass reinforced LCP E140i Japan Baoli High rigidity, high flow, high heat resistance
Category:
Rubber and plastic/engineering plastic/LCP
Model:
Brand:
Japan Baoli
Retail Price
84.00USD
重量
kg
- Product Description
-
Description :
LCP E140i Japan Baoli Enhancement; Fiberglass microbeads reinforcement; Balanced rigidity/toughness; High rigidity; High mobility; heat-resistant
injection molding
E140i Physical Property Table
Physical properties rated value unit test method density one point seven one g/cm3 ISO 1183 shrinkage rate (Horizontal traffic) zero point five three % ISO 294-4 (Traffic) zero point one zero % ISO 294-4 mechanical properties rated value unit test method tensile strength one hundred and seventy MPa ASTM 638 Elongation (fracture) one point eight % ASTM 638 flexural modulus MPa ISO 178 bending strength two hundred and twenty MPa ISO 178 Charpy Notched Impact Strength twenty kJ/m2 ISO 179/1eA thermal performance rated value unit test method Hot deformation temperature (1.8 MPa, unannealed) two hundred and eighty °C ISO 75-2/A Electrical performance rated value unit test method surface resistivity 1.0E+16 ohms IEC 60093 volume resistivity 1.0E+16 ohm·cm IEC 60093 dielectric constant (1 kHz) four point five zero IEC 60250 (1 MHz) four IEC 60250 (10.0 GHz) three point seven zero IEC 60250 Dissipation factor (1 kHz) zero point zero zero zero zero one six IEC 60250 (1 MHz) zero point zero zero zero zero two nine IEC 60250 ( 10.0 GHz 9.0E-6 IEC 60250 Arc resistance one hundred and forty-three sec ASTM 495 dielectric strength (1.00 mm) forty-two kV/mm IEC 60243-1 (3.00 mm) twenty-eight kV/mm IEC 60243-1 AfterSalesService :
Key words:- Fiberglass reinforced LCP
