New quotation for concrete color correction agent/color correction agent 2022

Description :

　　Concrete color correction agent, color correction agent, concrete color correction agent, concrete repair agent, concrete leveling agent

　　Concrete color correction agent

　　The independent research and development design team currently owned by the company is committed to promoting the modernization of products while increasing their performance.

　　1、 Purpose:

　　The appearance protection of plain concrete buildings, bridges, tunnels, bridge piers, subways, concrete components, and high-speed railway bridges covers defects and cracks, imitates plain concrete decoration, and provides waterproof protection for concrete.

　　2、 Characteristics

　　1. Color diversity: The prominent feature of Z4-XF is the diversity of colors. The main agent is matched with color paste, and users can independently adjust the color according to the depth of the concrete color on site;

　　2. Excellent concealment: specifically designed for flat colors, it covers defects and microcracks, giving concrete components a good and uniform appearance;

　　3. Excellent protection: waterproof and corrosion-resistant, improving the service life of concrete structures;

　　4. Water based, odorless, non combustible, belonging to green building materials;

　　5. Not easily detached or discolored, with good weather resistance;

　　6. Simple construction, easy operation, both rolling and spraying are acceptable.

　　3、 Usage

　　1. Grassroots requirements:

　　If there are wide cracks or defects in the concrete, they need to be repaired first. The attached oil and pollutants, weathered substances, algae, and moss should be removed, and the surface slurry should be polished off. The base layer should be firm and smooth to allow Z4-XF to be absorbed.

　　2. Color grading:

　　First, stir the color correction agent evenly and take out 500 grams, place it in a wide mouthed container, then drip 5-10 drops of black color paste (according to the depth of the base color), gradually observe the color change until it is roughly consistent with the base color, and then drip 10-20 drops of yellow color paste (according to the depth of the base color), observe the color change at any time. Until the color is adjusted to match the base color. Due to the reddish color of some concrete base layers, 2-5 drops of red color paste can be added as appropriate. Perform fine-tuning. After the sample is prepared, adjust the entire bucket of color correction agent according to the proportion of the sample and proceed with construction.

　　1. Construction:

　　First, focus on treating areas with micro cracks and obvious defects. If the surface condition is poor, you can adjust the color slightly darker and spray it as a whole first.

　　After drying thoroughly once, apply Z4-XF overall coating, which should be thin and uniform, forming a consistent color appearance.

AfterSalesService :

• Color correction agent