Consultation on Chaoyang Diamond Sand Floor Hardening Agent Products

Description :

　　NR-312 wear-resistant flooring material (hardener) is used for concrete floors that require wear resistance, impact resistance, and dust reduction, such as warehouses, factories, parking lots, maintenance workshops, garages, warehouse style shopping malls, docks, and places that require uniform colors to improve work hygiene and aesthetics while also being free of corrosive media.

　　characteristic

　　NR-312 wear-resistant flooring material (hardener) enhances the wear resistance and impact resistance of concrete floors. Greatly increased the density of concrete, reduced dust generation, increased the oil resistance of the ground, and formed a high-density, easy to clean, and anti-seepage ground. Construction together with the ground, with a short construction period. Good durability, reducing costs caused by periodic coating or surface thickening. It has less dust generation compared to non-metallic hardened floors, a sparkling appearance like a starry night, better impact resistance, and has a certain effect on anti-static.

　　process flow

　　1： Spread the aggregate evenly on the leveling layer before it dries;

　　2： Edge reinforcement and ground grinding;

　　3： Saw open the concrete at the appropriate position, make expansion joints, and fill them with the required joint filler;

　　4： Apply transparent sealant roller, smooth with an electric trowel, smooth, finish, and cure.

　　Performance characteristics: TM-03 wear-resistant flooring material (hardener) is evenly spread on the surface of the concrete in the initial setting stage, and after overall solidification, it forms a dense and super strong hardened surface layer with the concrete floor. It is a high-performance wear-resistant floor with compression resistance, impact resistance, wear resistance, high precision and coloring. Construction together with concrete flooring can shorten the construction period without the need for a mortar leveling layer.

　　3 Basic Requirements

　　The strength of the base concrete should reach C25 or above, the water cement ratio should be controlled below 0.50, the slump difference of the concrete should be controlled between 70-100mm, and the concrete mixture should minimize segregation and control bleeding as much as possible.

　　To ensure sufficient fluidity of the concrete mixture and facilitate construction, it is recommended to add appropriate admixtures to the concrete.

　　The base concrete should be poured and compacted according to the standards of excellent concrete, paying attention to size and reducing the generation of floating slurry.

　　The surface of the hardening agent should be constructed simultaneously with the concrete structural layer. If it is necessary to construct it simultaneously with the leveling layer, it is recommended to use fine aggregate concrete for the leveling layer, with a thickness of not less than 50mm, and consider configuring expansion steel mesh.

　　Pay special attention to the corners of the base concrete construction block to ensure that the concrete is compacted and compacted, and additional reinforcement measures should be taken.

　　4 Scope of application: Suitable for newly poured concrete construction, suitable for indoor and outdoor concrete surfaces;

　　1. Industrial plants, production workshops

　　2. Warehouse, logistics center

　　3. Garage, parking lot

　　4. Supermarkets and stores

　　5 colors: cement color, gray, green, yellow, red, etc.

　　NR-312 Iron Steel Sand Anti abrasive NR-312 Iron Steel Sand Anti abrasive is a cement-based composite single component dry powder mortar composed of high-strength iron steel sand, high-grade cement, mineral admixtures, crack resistant and wear-resistant agents, etc. It is formulated through industrial production and has low wear loss, high strength, controllable shape, strong integrity, simple construction, and good construction performance. Due to the addition of polymer, the base concrete is firmly bonded. NR-312 iron steel sand can be used by adding water and mixing it on site. It has good construction and workability. A certain thickness of wear-resistant layer is formed on the surface of the silo or ore tank by manual plastering. After normal curing, it can meet the technical requirements. It has high wear resistance, high bonding strength with the foundation concrete (steel silo), strong impact resistance, high compressive strength, good durability, and long service life. NR-312 Iron Steel Sand Wear resistant I. NR-312 High strength Iron Steel Sand Wear resistant Abrasive Application Range: 1. Coal unloading trenches, coal hoppers, coal storage bins, dry coal grates, tippers, slag extractors, water treatment, etc. in the power generation industry. 2. Corrosion resistant flooring and pump foundations in the chemical industry. 3. Wear resistant lining plates inside gangue bins, medium buckets, scraper conveyors, bucket elevators, chutes, and sieve hoppers in the coal industry. 4. Blast furnace mixing silos, sintering silos, feeders, ball making machines, etc. in the steel industry. 2、 NR-312 High strength Iron Steel Sand Wear resistant Material Product Features: 1. High strength, high wear resistance, impact resistance, erosion resistance, oil penetration resistance. 2. Good flame retardancy, low water absorption, high and low temperature resistance

　　NR-310 floor hardener product introduction: NR-310 diamond sand wear-resistant hardened floor, commonly known as diamond sand wear-resistant floor. It is composed of mineral alloy aggregates with particle size distribution, special cement, other admixtures and additives, and can be used immediately after opening the bag. Spread it evenly on the surface of the concrete that is about to set, process it to form a whole with the concrete floor, and achieve high-performance wear-resistant flooring with high density and coloring.?

AfterSalesService :

• NR310 floor hardener