Heilongjiang Color Difference Adjuster Factory first-hand source

Description :

　　Concrete color reducer

　　1、 Purpose:

　　The appearance protection of plain concrete buildings, bridges, tunnels, bridge piers, subways, concrete components, and high-speed railway bridges covers defects and cracks, imitates plain concrete decoration, and provides waterproof protection for concrete.

　　2、 Characteristics

　　1. Color diversity: The prominent feature of Z4-XF is the diversity of colors. The main agent is matched with color paste, and users can independently adjust the color according to the depth of the concrete color on site;

　　2. Excellent concealment: specifically designed for flat colors, it covers defects and microcracks, giving concrete components a good and uniform appearance;

　　3. Excellent protection: waterproof and corrosion-resistant, improving the service life of concrete structures;

　　4. Water based, odorless, non combustible, harmless to human body, belonging to green building materials;

　　5. Not easily detached or discolored, with good weather resistance;

　　6. Simple construction, easy operation, both rolling and spraying are acceptable.

　　3、 Usage

　　1. Grassroots requirements:

　　If there are wide cracks or defects in the concrete, they need to be repaired first. The attached oil and pollutants, weathered substances, algae, and moss should be removed, and the surface slurry should be polished off. The base layer should be firm and smooth to allow Z4-XF to be absorbed.

　　2. Color grading:

　　First, stir the color correction agent evenly and take out 500 grams, place it in a wide mouthed container, then drip 5-10 drops of black color paste (according to the depth of the base color), gradually observe the color change until it is roughly consistent with the base color, and then drip 10-20 drops of yellow color paste (according to the depth of the base color), observe the color change at any time. Until the color is adjusted to match the base color. Due to the reddish color of some concrete base layers, 2-5 drops of red color paste can be added as appropriate. Perform fine-tuning. After the sample is prepared, adjust the entire bucket of color correction agent according to the proportion of the sample and proceed with construction.

　　1. Construction:

　　First, focus on treating areas with micro cracks and obvious defects. If the surface condition is poor, you can adjust the color slightly darker and spray it as a whole first.

　　6. Simple construction, easy operation, both rolling and spraying are acceptable. In summary, in order to achieve the construction quality standards for the appearance of bridge and culvert concrete, it is necessary to strictly control the formwork, mixing ratio, pouring vibration, curing and other work of the concrete. Good construction technology and the sense of responsibility of construction personnel are required. Therefore, prevention is the main focus, and control work should be strengthened to gradually improve its appearance quality. The independent research and development design team currently owned by the company is committed to promoting the modernization of products while increasing their performance.

　　Concrete color difference adjuster, color difference repair agent, concrete color difference repair agent, concrete repair agent, concrete leveling agent, concrete color difference adjuster. The company currently has an independently developed design team dedicated to promoting product innovation and increasing product performance.

　　Z4-XF color difference adjuster can be ordered from reliable manufacturers. Consultation on ordering concrete color difference adjuster can be found in the on-site factory. Beijing Haiyan Xingye R&D and production, wholesale and retail, welcome to order! Strong manufacturer, sufficient supply, ordering consultation, online ordering discounts!

　　1、 Application: Appearance protection of plain concrete buildings, bridges, tunnels, bridge piers, subways, concrete components, and high-speed railway bridges, covering defects and cracks, imitating plain concrete decoration, and providing waterproof protection for concrete. 2、 Feature 1: Color Diversity: The prominent feature of Z4-XF is the diversity of colors. The main agent is matched with color paste, and users can independently adjust the color according to the depth of the concrete color on site; 2. Excellent concealment: specifically designed for flat colors, it covers defects and microcracks, giving concrete components a good and uniform appearance; 3. Excellent protection: waterproof and corrosion-resistant, improving the use of concrete structures; 4. Water based, odorless, non combustible, belonging to green building materials; 5. Not easily detached or discolored, with good weather resistance;

AfterSalesService :

• Concrete color correction agent