Shanxi concrete leveling agent is supplied by on-site merchants

Description :

　　Concrete color reducer

　　1、 Purpose:

　　The appearance protection of plain concrete buildings, bridges, tunnels, bridge piers, subways, concrete components, and high-speed railway bridges covers defects and cracks, imitates plain concrete decoration, and provides waterproof protection for concrete.

　　2、 Characteristics

　　1. Color diversity: The prominent feature of Z4-XF is the diversity of colors. The main agent is matched with color paste, and users can independently adjust the color according to the depth of the concrete color on site;

　　2. Excellent concealment: specifically designed for flat colors, it covers defects and microcracks, giving concrete components a good and uniform appearance;

　　3. Excellent protection: waterproof and corrosion-resistant, improving the service life of concrete structures;

　　4. Water based, odorless, non combustible, harmless to human body, belonging to green building materials;

　　5. Not easily detached or discolored, with good weather resistance;

　　6. Simple construction, easy operation, both rolling and spraying are acceptable.

　　3、 Usage

　　1. Grassroots requirements:

　　If there are wide cracks or defects in the concrete, they need to be repaired first. The attached oil and pollutants, weathered substances, algae, and moss should be removed, and the surface slurry should be polished off. The base layer should be firm and smooth to allow Z4-XF to be absorbed.

　　2. Color grading:

　　First, stir the color correction agent evenly and take out 500 grams, place it in a wide mouthed container, then drip 5-10 drops of black color paste (according to the depth of the base color), gradually observe the color change until it is roughly consistent with the base color, and then drip 10-20 drops of yellow color paste (according to the depth of the base color), observe the color change at any time. Until the color is adjusted to match the base color. Due to the reddish color of some concrete base layers, 2-5 drops of red color paste can be added as appropriate. Perform fine-tuning. After the sample is prepared, adjust the entire bucket of color correction agent according to the proportion of the sample and proceed with construction.

　　1. Construction:

　　First, focus on treating areas with micro cracks and obvious defects. If the surface condition is poor, you can adjust the color slightly darker and spray it as a whole first.

　　3、 Usage 1. Base requirements: If there are wide cracks or defects in the concrete, they need to be repaired first, and the attached oil stains, pollutants, weathered substances, algae, and moss should be removed. The surface slurry should be polished and removed, and the base should be firm and flat to allow Z4-XF to be absorbed. 2. Color adjustment: First, stir the color correction agent evenly and take out 500 grams, place it in a wide mouthed container, then drip 5-10 drops of black color paste (according to the depth of the base color), gradually observe the color change until it is roughly consistent with the base color, and then drip 10-20 drops of yellow color paste (according to the depth of the base color), observe the color change at any time. Until the color is adjusted to match the base color. Due to the reddish color of some concrete base layers, 2-5 drops of red color paste can be added as appropriate. Perform fine-tuning. After the sample is prepared, adjust the entire bucket of color correction agent according to the proportion of the sample and proceed with construction. 1. Construction: Focus on the areas with micro cracks and obvious defects first. If the surface condition is poor, you can adjust the color slightly darker and spray it as a whole first. After drying thoroughly once, apply Z4-XF overall coating, which should be thin and uniform, forming a consistent color appearance. The number of coats can be adjusted according to on-site needs. If the base condition is good, one coat is sufficient, and it can be put into use after 3 days of drying and curing.

　　Introduction to the Performance and Advantages of Concrete Protective Agent Factory Quotation

　　The waterproof mechanism of concrete protectants is the chemical reaction between catalysts and free alkali in concrete, which generates a stable dendritic crystal gel layer inside the concrete. It can effectively block micro cracks and capillary gaps inside the concrete, becoming a part of the overall structure of the concrete, forming a complete solid body and producing strong waterproof effect. The concrete structure has long-lasting waterproof function and better compactness and compressive strength, with a penetration depth of 20-30mm. At the same time, it can effectively prevent acidic substances, oil stains, and engine oil from corroding the concrete. 2. Advantages of concrete protectant: green, colorless and odorless, high-tech inorganic transparent liquid. Construction process: 1. Base treatment (rust removal, polishing, putty repair crack treatment) 2. Base maintenance: Thoroughly remove the peeling and hollow base, remove dust and grease, and make the concrete color completely consistent. 3、 Color difference adjustment. If there is a difference in color difference between the concrete, color difference adjustment agents can be used to repair it. 4、 After the color difference repair is completed, mix the clear water concrete protective agent evenly and spray it using the spraying method.

　　Z4-XF color difference adjuster can be ordered from reliable manufacturers. Consultation on ordering concrete color difference adjuster can be found in the on-site factory. Beijing Haiyan Xingye R&D and production, wholesale and retail, welcome to order! Strong manufacturer, sufficient supply, ordering consultation, online ordering discounts!

　　1、 Application: Appearance protection of plain concrete buildings, bridges, tunnels, bridge piers, subways, concrete components, and high-speed railway bridges, covering defects and cracks, imitating plain concrete decoration, and providing waterproof protection for concrete. 2、 Feature 1: Color Diversity: The prominent feature of Z4-XF is the diversity of colors. The main agent is matched with color paste, and users can independently adjust the color according to the depth of the concrete color on site; 2. Excellent concealment: specifically designed for flat colors, it covers defects and microcracks, giving concrete components a good and uniform appearance; 3. Excellent protection: waterproof and corrosion-resistant, improving the use of concrete structures; 4. Water based, odorless, non combustible, belonging to green building materials; 5. Not easily detached or discolored, with good weather resistance;

AfterSalesService :

• Concrete color correction agent