Beijing Asphalt Cold Patch Same City Ordering/Delivery/Construction One stop Service Consultation

Description :

　　Bridge expansion joint fillingWholesale of Cold Asphalt Factory Supply

　　Road surface repairasphaltCold replenishment strength factory recommendation

　　 property residential areapotholerepairCold asphalt/asphalt cold oil ordering

　　Manufacturer's source of goods, Shunyi Changping base, sufficient supply, free shipping for orders over three tons around Beijing

　　Beijing Shunyi Beiwu on-site factory supplies goods, with sufficient supply, favorable prices, fast delivery, and 24-hour service. Welcome to inquire! Free construction technical guidance is provided, and if needed, labor and materials can be contracted for construction!

　　 After being properly compacted, the flat cold patching material can stick to the repair site for a long time without falling off. Cold asphalt is produced according to seasonal temperature, with cold replenishment in spring and autumn, cold resistant cold replenishment in winter, and high temperature cold replenishment in summer. Different materials are used in different seasons for better results.

　　Application scope of cold replenishment materials:

　　Suitable for repairing various types of road surface layers in any weather and environment, such as asphalt concrete roads, cement concrete roads, parking lots, airport runways, bridge expansion joints, etc.

　　Characteristics of cold replenishment products

　　Cold repair of potholes and repair of public facility road surfaces only requires simple cleaning of the original potholes, without the need to cover them with asphalt emulsion. Coating, easy to use, readily available, no need for heavy construction machinery, can be repaired within minutes and immediately restore road traffic.

　　Cold replenishment construction:

　　1. Cleaning:

　　Generally, the gravel and waste residue in and around the pit to be repaired should be cleaned up, and there should be no mud, ice or other debris in the pit. When repairing highways and roads, the repaired trenches should have neat edges, and the removal of waste should be done until a solid and sturdy surface is visible.

　　2. Fill in:

　　Fill enough cold repair materials into the pit, knowing that the filling is about 1.5cm above the ground. For highway and general road repairs, the amount of material input can be increased by about 20% or 10%. The filling point should be higher than the surrounding road surface and curved.

　　When the depth of road potholes is more than 5cm, the filling work should be done every 3-5cm as a layer, layer by layer filling and compacting layer by layer.

　　3. Compaction:

　　After evenly laying, repair the environment according to the site conditions

AfterSalesService :

• Cold asphalt in Changping District