Customized industrial vortex aquaculture aerator with thickened aluminum shell, high-pressure vortex air pump blower

Description :

Customized industrial vortex aquaculture aerator with thickened aluminum shell, high-pressure vortex air pump blower

Vortex air pumpWidely used in food, pharmaceutical and chemical packaging machinery, cardboard packaging and printing machinery, environmental treatment equipment aeration, aquaculture, biology, agricultural ecological engineering, advertising printing equipment, screen printing machines, photographic plate making machines, plastic rubber machinery and auxiliary equipment, automatic feeding and drying machines, food and beverage filling machines, powder packaging machines, combustion oxygen reduction machines, cigarette filter forming machines, electroplating tank liquid mixing, atomization drying machines, welding equipment, paper transportation, industrial dry cleaning machines, cleaning applications, air dust removal, dry bottles, gas transmission, feeding, collection, environmental water treatment equipment, central dust collection, air treatment equipment, various textile and knitting equipment, cloth, board, leather cutting machinery, industrial cleaning equipment, agricultural product storage, refrigeration engineering, Atomization dryer In the field of mechanical equipment such as dilute phase gas transportation.

This product has passed the European CE certification and CCC certification, and does not require any modifications. After testing, it can be used in Europe, America, Asia, and other regions!

High pressure fan, high-pressure blower, vacuum vortex air pump specifications:

Power: 0.18 KW 0.2KW 0.4KW 0.55KW 0.75KW 0.85KW 1.1KW 1.3KW 1.5KW 1.6KW 2.2KW 3.8KW 4KW 5.5KW 7.5KW 8.5KW 9KW

11KW 12.5KW 13KW 15KW 16.5KW 18.5KW 20KW 25KW 30KW

High temperature resistant type: 0.4KW 0.75KW 1.5KW 2.2KW 3.7KW 4KW 5.5KW 7.5KW 11KW 15KW 18.5KW

Single phase voltage: 0.12KW 0.18KW 0.2KW 0.4KW 0.55KW 0.75KW 0.85KW 1.1KW 1.3KW 1.5KW 1.6KW 2.2KW

Wind pressure: 50mbar-1040mbar (positive pressure: 8KPA-104KPA) (negative pressure: 8KPA-73KPA) (for the convenience of selecting different specifications, single-stage/two-stage models are available)

Airflow: 40m3/h-3000m3/h (for the convenience of selecting different specifications, both single-stage and two-stage models are available)

Frequency: 50HZ/60HZ

Voltage: 110V-200V-220V-280V-380V-400V-415V-440V-600-615V (universal voltage, applicable to all countries). If special voltage is required, it can be customized according to requirements

Pressure relief valve: RV-01 RV-02 (for use with)

Filter: MF08 MF10 MF12 MF16 MF20 MF32

Faults and solutions

　　1、 The fan does not rotate: 1. Not connected to the power supply - connected to the power supply; 2. Motor not working - check motor wiring or replace motor; 3. Damaged fan head - repair or replace the fan; 4. Foreign objects stuck in the fan - remove the foreign objects; 2、 Increased noise: 1. Dry lubrication of bearings - adding bearing grease; 2. Bearing damage - replace the bearing; 3. Impeller wear - replace impeller or pump head; 4. Loose or detached sturdy components - tighten the fasteners tightly; 5. There are foreign objects inside the fan - remove the foreign objects or replace the pump head. 3、 Increased vibration: 1. Bearing damage - replace the bearing; 2. Unbalanced impeller - remove foreign objects from the impeller or calibrate the dynamic and static balance; 3. Main shaft deformation - replace the main shaft or pump head. 4. Entering the turbulent zone in working state - adjusting the working state to avoid the turbulent zone; 5. The inlet and outlet filter screens are blocked - clean the filter screens. 4、 Temperature rise: 1. Excessive intake temperature - reduce intake temperature; 2. Dry lubrication of bearings - adding bearing grease; 3. Reduced fan efficiency - remove blade dust or replace pump head; 4. Change in work status - adjust work status; 5. Environmental temperature increase - increase environmental ventilation fans; 6. Pump body temperature is too high - check if the inlet and outlet are blocked. 5、 Pressure reduction: 1. Pump head speed reduction - low power supply voltage or motor failure; 2. Increase in pipeline resistance - reduce pipeline resistance; 3. Change in work status - adjust work status; 4. Reverse motor direction - rewire the motor. 6、 Flow reduction: 1. Blockage of inlet and outlet air filters - clean the filters; 2. Pump head speed reduction - low power supply voltage or motor failure; 3. Increase in pipeline resistance - reduce pipeline resistance; 4. Increase in work status - adjust work status; 5. Reverse motor direction - rewire the motor.

Customized industrial vortex aquaculture aerator with thickened aluminum shell, high-pressure vortex air pump blower

AfterSalesService :

• High pressure vortex air pump