High pressure vortex air pump for packaging and vacuuming cotton quilts
High pressure vortex air pump for packaging and vacuuming cotton quilts

High pressure vortex air pump for packaging and vacuuming cotton quilts

Category:

Environmental Protection/Fan exhaust equipment/High pressure blower

Model:

RB-41D-3

Brand:

All wind

brand:

All wind

model:

RB-41D-3

boost:

20kpa

material:

cast aluminum

type:

high-pressure blower

Supporting motor power:

1.3KW

Scope of Application:

Equipment matching

performance:

Low noise fan

Number of blades:

fifty-seven

purpose:

packaging machinery

weight:

17KG

shaft power:

one point three

speed:

two thousand and eight hundred

Fan pressure:

high-pressure blower

airflow direction:

Vortex type

Turbine head material:

cast aluminum

Overall dimensions:

286*302*294

Place of Origin:

Jiangsu

manufacturer:

Quanfeng Environmental Protection Technology Co., Ltd

Retail Price

856.00USD


重量

kg

  • Product Description
  • brand

    All wind

    model

    RB-41D-3

    boost

    20kpa

    material

    cast aluminum

    type

    high-pressure blower

    Supporting motor power

    1.3KW

    Scope of Application

    Equipment matching

    performance

    Low noise fan

    Number of blades

    fifty-seven

    purpose

    packaging machinery

    weight

    17KG

    shaft power

    one point three

    speed

    two thousand and eight hundred

    Fan pressure

    high-pressure blower

    airflow direction

    Vortex type

    Turbine head material

    cast aluminum

    Overall dimensions

    286*302*294

    Place of Origin

    Jiangsu

    manufacturer

    Quanfeng Environmental Protection Technology Co., Ltd

    Description :

    High pressure vortex air pump for packaging and vacuuming cotton quilts

      The XGB high-pressure fan is mainly composed of components such as impeller, casing, air inlet, motor, bearings, and cooling blades.

      1. Shell material: The high-pressure fan adopts die cast aluminum, which is harder than ordinary aluminum shells. Compared with iron shell fans, die cast aluminum has a lightweight effect and can be made into a multi blade heat dissipation structure.

      2. Motor performance: The motor used for the high-voltage fan is a dual frequency wide voltage motor, such as single-phase 110V/230V industrial three-phase: 220/380/415/660V, etc. It can be used with a frequency conversion motor of 35-75HZ frequency modulation.

      3. Fan oil seal: High pressure fans use rubber oil seals with stable performance.

      4. Fan bearings: High pressure fans use high-quality high-speed sealed bearings such as NSK for important components, ensuring sustainable operation.

    Made of special materials:

    1、 The wind blades and covers are made of the world's hardest ADC12 material, equivalent to the same material as Mercedes Benz wheel rims.

    2、 The bearing adopts high-speed and high-temperature resistant imported bearings, with 2800 revolutions per minute at 50Hz and 3450 revolutions per minute at 60Hz, without lubrication and maintenance. Supports 24-hour long-term operation, with stable and reliable performance.

    3、 The air inlet and outlet are equipped with built-in soundproof pipes to achieve low noise.

    4、 Models below 1.1KW can be used at full voltage.

    5、 Stable pressure, demonstrated through examples of water treatment and electroplating treatment, with even stirring and water wave rolling height *.

    6、 Under the same power and pressure, the flow rate is greater than that of similar products.

    7、 The wind cover adopts a sheet-like heat dissipation design, which is equivalent to a motorcycle engine heat dissipation device, greatly reducing the temperature during fan operation.

    8、 The all wind high-pressure fan adopts the principle of bearing pre design, with two bearings placed at the front end of the fan blades and the rear end of the motor, achieving dynamic balance configuration and facilitating heat dissipation.

    (The reason is that there are heat dissipation fins at the front end of the fan blades for heat dissipation, while the bearings at the back end work under the built-in cooling fan of the fan, thus keeping the bearings working for a long time at low temperatures.)

    9、 Adopting a special shock-absorbing foot base design greatly reduces the vibration generated during the operation of the fan.

    10、 Economic and energy-saving. At the same power, pressure, and flow rate, the current of a full wind high-pressure fan is lower than that of other similar products.

    High pressure vortex air pump for packaging and vacuuming cotton quilts

    AfterSalesService :

    Key words:
    • High pressure vortex air pump