Particle filtration efficiency detector Mask synthetic blood penetration tester Center

Description :

　　The mask particle filtration efficiency tester is used to test the percentage of bacterial suspended particles filtered out by mask materials at a specified flow rate. The use of dual gas path simultaneous comparative sampling method improves the accuracy of sampling and is suitable for performance testing of bacterial filtration efficiency of medical surgical masks by metrological verification departments, research institutes, medical mask production enterprises, and other related departments. Mainly used for metrological verification departments, research institutes, medical mask production enterprises, etc.

　　The detection conditions for the mask particle filtration efficiency tester are: the testing environment temperature is (25 ± 5) C, and the relative humidity is (30 ± 10)%. Testing process:

　　1. Test flow rate (85 ± 4) L/min (if multiple filter elements are used, the flow rate should be evenly divided. If dual filter elements are used, the detection flow rate of each filter element should be (42.5 ± 2) L/mi. If multiple filter elements may be used separately, they should be tested according to the detection conditions of a single filter element). 2. Adjust the filtering efficiency detection system to the detection state and adjust its relevant parameters;

　　2. Use appropriate fixtures to airtightly connect the mouth military body or filter element to the detection device;

　　3. After the testing begins, record the filtration efficiency of the sample with a sampling frequency of 1 time/min. The testing should continue until the particulate matter on the mask is loaded to 30mg; Data processing: Use the small value of the filtration efficiency obtained during the entire testing process as the filtration efficiency of the batch of mask sample materials.

　　Mask particle filtration efficiency detector Product details:

　　1. The use of a cold gas aerosol generator produces continuous and stable aerosol particles, making it easy to add the solution;

　　2. Using high-precision PM2.5 sensors to measure aerosol concentration;

　　3. Full process particle leakage prevention design to protect the safety of experimental personnel;

　　4. Two sets of aerosol generators: saline particulate aerosol generator and oily particulate aerosol generator;

　　5. Equipped with a static charge neutralization device for aerosol particles;

　　6. Pneumatic fixture with protective device, safe and convenient to use;

　　7. Configure temperature and humidity sensors to display real-time environmental temperature and humidity (temperature and humidity requirements: 25 ℃± 5 ℃, 30% RH ± 10% RH);

　　8. Configure glass rotor flowmeter, vacuum pump, and laser dust particle counter;

　　9. Control system: computer-controlled testing process, automatic data collection, configuration of computer and testing software;

　　10. Computer automatically tests gas concentration and calculates filtration efficiency; Can save, output, query, and print test data;

　　11. Touch screen control, simple and intuitive operation.

　　The working principle of the mask particle filtration efficiency detector is:

　　The composition and principle of the mask particle filtration efficiency tester equipment include an oil mist generator, data acquisition software, detection product tooling device, concentration detector, filtered concentration detector, computer data calculation device, pressure regulation device, and tooling pipeline testing device. The photometer in the system is used to detect the concentration of the mask before and after filtration, thus completing the detection of the protective efficiency of the mask particles.

AfterSalesService :

• Particle filtration efficiency detector