Wireless meter reading system terminal, garbage power recharge, heating billing system software protocol

Description :

Qingdao Zhiyuan InstrumentWireless meter reading system terminalFunction Introduction:

　　1. Dynamic display of valve status, unboxing status, instantaneous flow rate, pressure, temperature, cumulative flow rate, etc. for each hot user, with different colors used to represent different statuses; When each user point is in normal state, it is displayed in blue. When the parameters exceed the limit, it is reported, or there is a fault, it is displayed in red and flashes, and information is synchronously sent to notify personnel; 2. Real time historical data and curves of flow rate, pressure, temperature, density, differential pressure, and frequency are displayed in the same coordinate system, and can be freely compared. The mouse follows and displays the current data, which is intuitive and easy to analyze; 3. The remote meter reading system can directly add hot customers through the front-end webpage, with convenient and fast operation, sorted by number, and the order of customer arrangement can be freely adjusted; Provide detailed information on thermal units, establish maintenance information for measuring equipment, and facilitate management personnel to query the history and current status of instruments; 4. Automatically generate daily, monthly, annual, and report forms, and be able to print reports in real time. Reports can be made according to the requirements of the thermal company. 5. Thermal user management data system, including flow rate, pressure, temperature, upper and lower limit report settings, instrument current operating parameters, unit price, special policies, responsible person information, etc., to prevent users from modifying settings; 6. The prepaid system management software has multi-level operation permissions, which are set and controlled by administrators to prevent unauthorized operations by different levels of operators;

　　Qingdao Hesheng CompanyWireless meter reading system terminal, garbage power recharge, heating billing system software protocolSmart Decision Analysis: Customize reports based on the needs of the company's management decision-makers, and provide targeted analysis to assist in business decision-making. 1. Real time and historical data collection and analysis of total steam supply and consumption; 2. Analysis of year-on-year and month on month data on total steam supply, steam consumption, various branch lines, and heat users; 3. Analyze the year-on-year and month on month data of steam consumption of heat users by industry, and analyze the proportion of steam consumption in each industry in the heating network; At the same time, based on the impact of market conditions on the industry and the historical situation of industry gas consumption, analyze the changes in gas consumption in the future period.

　　4. The energy consumption analysis system can calculate the energy consumption of heat sources, comprehensive energy consumption of heating, and energy consumption of pipeline losses. At the same time, it provides a large number of analysis models and tools, which can compare the energy consumption of the same period in the history of the enterprise, as well as compare it with the same enterprise. 5. Smart heating cloud platform query and statistics: It can query and display data for each instrument at any time during a certain period of time, facilitating assessment, query, valve position, flow rate and other data upload for each shift. The upper computer can set the reporting method arbitrarily. Flexible communication parameter settings: The communication address and baud rate of the prepaid controller can be set as needed (address range: 1-128, baud rates: 2400, 4800, 9600). Currently, there are many technologies used for meter reading in China, such as manual meter reading, RS485 bus, infrared and wireless data remote transmission, etc. Among them, GPRS wireless data remote transmission and RS485 bus meter reading technologies are relatively mature and widely adopted

Wireless meter reading system terminal, garbage power recharge, heating billing system software protocolIt can also provide the user unit with greater regulation, control, and guarantee capabilities, ensuring that various secondary energy sources of the user unit can be fully supplied. It is very suitable for providing electricity, heating, and cooling to developing areas, commercial and residential areas, rural areas, pastoral areas, and mountainous areas, greatly reducing environmental pressure. In short, distributed energy systems can meet the needs of special occasions, provide possibilities for the comprehensive cascade utilization of energy, open up new directions for the utilization of renewable energy, and make outstanding contributions to improving energy utilization efficiency, enhancing safety, and addressing environmental pollution. This is also a very important advantage. After the establishment of the wireless meter reading system terminal, the value reading time of the meter has been unified, changing the original manual reading time of 15-30 minutes, achieving fairness in assessment while reducing the labor intensity of personnel, reasonably allocating resources such as personnel, finance, and materials, improving efficiency, and achieving economic benefits. The IC card gas sales management system consists of main hardware such as IP network cables, servers, IC card readers and writers, and main software such as operating system software, database software, heat network data IC card management system software, firewall software. The remote meter reading system replaces the traditional manual meter reading method with a fully automatic meter reading method, solving the problem of low efficiency in manual meter reading. Compared with similar meter reading systems, it is completely based on the popularization and application of the Internet of Things technology, and uses a pan tilt system architecture, which enables the system to have remote debugging, remote maintenance, and data exchange functions with external third-party software

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdWireless meter reading system terminalEquipped with RS232/RS485 standard communication interface and MODBUS RTU, MODBUS ASC Ⅱ industrial standard communication protocol, it can communicate with intelligent flow meters, read various measurement parameters and working parameters in intelligent flow meters.

　　1. The device has automatic dialing and disconnection redialing functions. When the network condition is unstable, it has the ability to automatically restore communication, ensuring stable system operation without human intervention; When the signal in the area is weak, the module can communicate normally by changing the signal reception and transmission strength of the module.

　　2. Online query function can be achieved through the Internet, and users only need to provide their username and password. The real-time online query function can be completed.

　　3. Equipped with data cable and 12VDC power supply.Wireless meter reading system terminal, garbage power recharge, heating billing system software protocolSystem security permission setting function: Permission setting provides comprehensive security authentication, and users cannot enter the system. Legitimate users can perform corresponding operations according to their permissions. The wireless remote intelligent meter reading system is built on the network of the GPRS data management center established within the enterprise, and transmits all incoming traffic data to the data center through the mobile GPRS network. The GPRS remote meter reading system has functions such as system maintenance, real-time monitoring, query statistics, curve analysis, etc

　　Qingdao Hesheng Zhiyuan Automation System Co., Ltd

　　189 Hui Xin 5483 Same number 1481

　　Q：3438-5007-67

AfterSalesService :

• Wireless meter reading system terminal