Distributed Energy Management System, Heating Station Energy Management, Steam IC Card Prepaid Method

Description :

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdDistributed Energy Management SystemEquipped with RS232/RS485 standard communication interface and MODBUS RTU, MODBUS ASC Ⅱ industrial standard communication protocol, it can communicate with intelligent flow meters, read various measurement parameters and working parameters in intelligent flow meters.

　　1. The device has automatic dialing and disconnection redialing functions. When the network condition is unstable, it has the ability to automatically restore communication, ensuring stable system operation without human intervention; When the signal in the area is weak, the module can communicate normally by changing the signal reception and transmission strength of the module.

　　2. Online query function can be achieved through the Internet, and users only need to provide their username and password. The real-time online query function can be completed.

　　3. Equipped with data cable and 12VDC power supply.Distributed Energy Management System, Heating Station Energy Management, Steam IC Card Prepaid MethodValve adjustment function 1: In manual mode, after inserting the device card, the valve opening can be adjusted through the keyboard. In automatic mode, after recharging, the valve will slowly open automatically. Equipped with remote control mode, the valve opening can be adjusted through the upper computer. With the continuous development of urban construction and the expansion of supply areas such as hot water, steam, tap water, and gas, traditional manual meter reading methods can no longer meet the requirements of enterprises for cost recovery, instrument operation status, and the construction of digital management technology platforms

Distributed Energy Management SystemOn site instrument installation:

Distributed Energy Management System, Heating Station Energy Management, Steam IC Card Prepaid MethodInstalling a protective box on the primary measuring equipment of the pipeline can provide shelter from wind and rain, protect the equipment, and extend its service life; 2、 It can prevent unauthorized operation of measuring equipment. Any type of flow meter is not suitable for distributed energy management systems. Choosing a flow meter that is suitable for thermal user conditions is the rigorous method. For steam metering schemes, the mainstream schemes are divided into two types: vortex street type and differential pressure type. In the actual heating process, we will cooperate with your side to conduct on-site inspections to determine which flow meter is more suitable for use.

　　Distributed energy management system is relative to traditional centralized energy supply systems. Traditional centralized energy supply systems use large capacity equipment, centralized production, and then transmit various types of energy to numerous users over a large area through door transmission facilities (such as large power grids, large heat grids, etc.); Distributed energy systems, on the other hand, are small and medium-sized energy conversion and utilization systems that directly face users, produce and supply energy on-site according to their needs, have multiple functions, and can meet multiple objectives.Distributed Energy Management SystemVarious meters transmit data to the on-site acquisition terminal through RS485 cables, and then transmit the data to the control room through independent and networked access to the system main station, avoiding external signals and network interference, ensuring the stability and security of data transmission. At the same time, it also has interfaces and redundancy with other networks. The system security permission setting function: permission settings provide comprehensive security authentication, and users cannot enter the system. Legitimate users can perform corresponding operations based on their permissions

　　Due to the relatively dispersed geographical distribution of various automobile enterprises and outdated means of measuring data collection and transmission, manual reading is adopted, with a reading frequency of once a day. This mode results in poor real-time performance of steam metering data, with only one data per day, which is not conducive to data analysis; After instrument malfunctions or unexpected power outages are not detected in a timely manner, they can only be discovered during inspections or meter readings, and the exact time of the malfunction cannot be determined, resulting in delayed maintenance and management. Some companies, for their own interests, manipulate on-site instruments or display devices, which is not conducive to timely problem detection and analysis. This leads to significant discrepancies between the export summary table of the thermal power company and the sub meters of various gas consuming enterprises, resulting in occasional metering and other situations at the end of the month settlement. Qingdao HeshengDistributed Energy Management System, Heating Station Energy Management, Steam IC Card Prepaid MethodReal time dynamic monitoring and management of gas users can be achieved. Provide a more timely data foundation and support platform for steam metering management work.

　　Qingdao Hesheng Zhiyuan Automation System Co., Ltd

　　189 Hui Xin 5483 Same number 1481

　　Q：3438-5007-67

AfterSalesService :

• Distributed Energy Management System