Smart heating energy-saving system, heating enterprise fee management, steam IC card prepaid application

Description :

Qingdao Zhiyuan Instrument Intelligent Heating Energy saving SystemThe task undertaken by the metering station is to measure various operational parameters of the flow meter system on site. Measurement: Measure the instantaneous flow rate, pressure, and temperature signals of on-site sensors, perform compensation density calculations, and calculate the required cumulative flow rate according to algorithms. Collect on-site power status, valve status, power-off/power on time, prepaid steam balance, settlement balance, instrument parameter report information, programming times, etc., and package these data together with measurement information. Within the same time granted by GPS, transmit the data of each point to the GPRS/CDMA communication module through data lines. The inefficient and outdated manual management method of manual meter reading is susceptible to human factors, with poor real-time performance, low reliability, and low efficiency. It cannot detect on-site faults in a timely manner. Due to the inability to collect data from all meters at the same time, it is also difficult to measure and analyze pipe losses, and thus cannot effectively manage the heating network

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdSmart heating energy-saving system, heating enterprise fee management, steam IC card prepaid applicationReport function: When the remaining balance is insufficient, the system automatically reports in both directions. The system automatically reports when unpacking. After the power supply is cut off, the system automatically reports in both directions. At the same time, the built-in UPS power supply continues to provide power, and the measurement will not be interrupted after a power outage; Upload valve position, flow rate and other data, and the upper computer can set the reporting method arbitrarily. You can also choose to send it. It has an overdraft function, and the overdraft amount will be deducted immediately during the next recharge (this function has permission restrictions); The system can set the valve opening, automatically control the size of the valve, ensure that the flow rate does not exceed the limit, and measure; And upload the actual valve opening in real-time; Simultaneously equipped with a heating function to prevent steam from impacting the pipeline. Lightning protection function: The box machine is equipped with a lightning protection module, but the control box must be reliably grounded. Convenient recharge: When the recharge software writes an IC card, there is no need to manually convert it into gas volume. Simply enter the amount and the software will automatically calculate the gas volume based on the unit. Price management: Different gas prices can be set in the recharge software according to different users, and can be modified at any time.

　　Qingdao Hesheng CompanySmart heating energy-saving system, heating enterprise fee management, steam IC card prepaid applicationAdvantage:

　　1. On site operation data 4G real-time upload: 4G wireless communication terminals are responsible for the important task of data transmission, and can upload on-site data to the heating network service center in real time to track and monitor the thermal parameters (pressure, temperature, flow rate, etc.) of the heating network, and grasp the heating status of the entire heating network management line. 2. Flexible networking and rapid deployment: Wireless networking mode has the characteristics of flexible networking, high data transmission rate, wide signal coverage, strong real-time performance, high security, low operating cost, and low maintenance cost; Suitable for situations where equipment is widely distributed and it is inconvenient to install network cables, wireless networking can achieve data transmission without geographical limitations as long as the operator's network coverage is available, shortening the project deployment cycle. 3. Fault diagnosis and analysis, timely fault reminder: on-site collection and measurement instrument failures can also be detected in a short period of time, and the fault time can be recorded and filed to avoid measurement losses and eliminate the idea of users stealing steam. In case of power outages or abnormal collection parameters at the hot user end, information can be timely predicted and personnel can be reminded to handle them through platforms or methods. 4. Remote operation and maintenance management, reducing operation and maintenance costs: Management personnel can see the steam usage of users in various places in the management background, without the need for on-site manual meter reading. Fault report information is convenient for maintenance personnel to check and repair in a timely manner, reducing and saving a lot of manpower and material resources

　　5. The intelligent water management cloud platform manages the uploading of valve position, flow and other data, and the upper computer can set the reporting method arbitrarily. Flexible setting of communication parameters: The communication address and baud rate of the prepaid controller can be set as needed (address range: 1-128, baud rates: 2400, 4800, 9600). The traditional meter reading method uses a pure manual reading mode during the meter reading process, and the final measurement cost result is also in manual mode in the later stage

　　Due to the relatively dispersed geographical distribution of various automobile enterprises and outdated means of measuring data collection and transmission, manual reading is adopted, with a reading frequency of once a day. This mode results in poor real-time performance of steam metering data, with only one data per day, which is not conducive to data analysis; After instrument malfunctions or unexpected power outages are not detected in a timely manner, they can only be discovered during inspections or meter readings, and the exact time of the malfunction cannot be determined, resulting in delayed maintenance and management. Some companies, for their own interests, manipulate on-site instruments or display devices, which is not conducive to timely problem detection and analysis. This leads to significant discrepancies between the export summary table of the thermal power company and the sub meters of various gas consuming enterprises, resulting in occasional metering and other situations at the end of the month settlement. Qingdao HeshengSmart heating energy-saving system, heating enterprise fee management, steam IC card prepaid applicationReal time dynamic monitoring and management of gas users can be achieved. Provide a more timely data foundation and support platform for steam metering management work.

　　Qingdao Hesheng Zhiyuan Automation System Co., Ltd

　　189 Hui Xin 5483 Same number 1481

　　Q：3438-5007-67

AfterSalesService :

• Smart heating energy-saving system