Smart heating network management platform, heating enterprise recharge, GPRS remote meter reading terminal

Description :

Qingdao Hesheng Zhiyuan Automation System Co., LtdSmart heating network management platform, heating enterprise recharge, GPRS remote meter reading terminalReport function: When the remaining balance is insufficient, the system automatically reports in both directions. The system automatically reports when unpacking. After the power supply is cut off, the system automatically reports in both directions. At the same time, the built-in UPS power supply continues to provide power, and the measurement will not be interrupted after a power outage; Upload valve position, flow rate and other data, and the upper computer can set the reporting method arbitrarily. You can also choose to send it. It has an overdraft function, and the overdraft amount will be deducted immediately during the next recharge (this function has permission restrictions); The system can set the valve opening, automatically control the size of the valve, ensure that the flow rate does not exceed the limit, and measure; And upload the actual valve opening in real-time; Simultaneously equipped with a heating function to prevent steam from impacting the pipeline. Lightning protection function: The box machine is equipped with a lightning protection module, but the control box must be reliably grounded. Convenient recharge: When the recharge software writes an IC card, there is no need to manually convert it into gas volume. Simply enter the amount and the software will automatically calculate the gas volume based on the unit. Price management: Different gas prices can be set in the recharge software according to different users, and can be modified at any time.

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdSmart heating network management and control platformSystem Introduction:

　　1. Establishment of a prepaid steam metering management center;

　　2. Installation, commissioning, and data transmission of 100 sets of prepaid steam metering equipment;

　　3. The vortex metering terminal opens 100 remote metering points, with N metering points used in the first phase, and the excess part reserved for later expansion preparation;

　　4. According to the steam parameters provided by Party A, the rated pressure is 2.5Mpa, the upper temperature limit is 320 ℃, the working pressure is 1.2Mpa, and the working temperature is 300 ℃. This data is an important parameter for us to choose a flow meter.

　　5. The wired data acquisition system of the steam metering station is based on the RS485 bus. The RS485 wired data remote meter reading system is a system that uses modern communication and computer network technology to automatically collect remote data. In the late 1980s and early 1990s, the pilot work of the automated meter reading system began. Various power supply enterprises across the country have basically established wireless power load control systems. Although their main construction purpose is to control loads, they are gradually being used for reading electricity meters for large users. The open database design supports user-defined monitoring station expansion and monitoring sensor expansion. Adapt to the continuous development needs of enterprises

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdSmart heating network management platform, heating enterprise recharge, GPRS remote meter reading terminalMeaning: In the context of vigorously building a smart city and promoting the development of "Internet plus" smart energy, the concept of smart heating came into being as an important branch of the energy industry. existingPre payment management of boiler steamThere are still some issues during operation, such as insufficient remote points, relatively outdated control technology, high energy consumption, and low energy metering. Urban heating belongs to the main content of energy conservation and emission reduction. The development of contemporary heating systems must effectively combine traditional engineering with modern data science and technology, and improve the effectiveness of energy efficiency management by predicting the operation status of the heating network. The design of heating systems is often driven by demand, and predicting the demand for heat load on the consumer side plays a crucial role in improving the overall efficiency of the heating network operation.

　　becauseSmart heating network management and control platformThere is a significant time delay in heat transfer during operation. By predicting the load of the heat production unit, appropriate adjustments can be made to the heat production plan based on the specific heat needs of the network, thereby improving the thermal efficiency of the entire heating network system. Smart heating energy-saving management is a new heating network composed of a heating physical equipment network (a network composed of heat sources, heating pipe networks, user systems, local display instruments, and control and regulation devices), a heating information Internet of Things (a network composed of sensors, data collection devices, data transmission devices, etc.), and an intelligent decision-making system based on an intelligent heating platform, referred to as the intelligent heating network. Intelligent heating is based on the heating physical equipment network and supported by the heating information Internet of Things. Through an intelligent decision-making system, it provides auxiliary decision-making support for operation and management personnel, forming a heating system form that reduces operating energy consumption while ensuring indoor comfort.

　　Qingdao Hesheng Zhiyuan Automation System Co., Ltd

　　189 Hui Xin 5483 Same number 1481

　　Q：3438-5007-67

AfterSalesService :

• Smart heating network management and control platform