Smart heating cloud platform, steam recharge for heating network, intelligent heating network design

Description :

Qingdao Hesheng Zhiyuan Smart Heating Cloud PlatformPrinciples of Measurement Software Design:

　　The system design follows the basic principles of "mature technology, real-time and fast, safe and reliable, economical and practical, easy to expand, and easy to upgrade".

　　2. The on-site measuring instrument technology meets the standard design, and adopts computer remote mode or assisted management mode.

　　3. Adopting a mature fully open, layered, and fully distributed system structure, the system configuration and equipment selection facilitate the expansion of hardware and functionality, and adapt to the rapid development of computer technology. By fully utilizing the technology in the computer field, the system performance can reach the domestic level, ensuring the safety and reliability of software and hardware, and long-term continuous operation, in order to achieve the goal of "unmanned and few people on duty".

　　4. The main network topology of the system adopts DDN network to enable communication between each station system and the central workstation, realizing data monitoring and functions. Information publishing is achieved through IE browsing through WEB Server, supporting remote access by intelligent terminals.

　　fiveSmart heating cloud platform, steam recharge for heating network, intelligent heating network designWith the continuous development of urban construction and the expansion of supply areas such as hot water, steam, tap water, and gas, the traditional manual meter reading method can no longer meet the requirements of enterprises for cost recovery, instrument operation status, and the construction of digital management technology platforms. System expansion and upgrading function: the system has an open data interface, which facilitates the addition and expansion of monitoring points in the later stage. System security permission setting function: permission setting provides complete security authentication, users cannot enter the system, and legitimate users can perform corresponding operations according to their permissions

　　Qingdao Zhiyuan InstrumentSmart Heating Cloud PlatformFunction Introduction:

　　1. Dynamic display of valve status, unboxing status, instantaneous flow rate, pressure, temperature, cumulative flow rate, etc. for each hot user, with different colors used to represent different statuses; When each user point is in normal state, it is displayed in blue. When the parameters exceed the limit, it is reported, or there is a fault, it is displayed in red and flashes, and information is synchronously sent to notify personnel; 2. Real time historical data and curves of flow rate, pressure, temperature, density, differential pressure, and frequency are displayed in the same coordinate system, and can be freely compared. The mouse follows and displays the current data, which is intuitive and easy to analyze; 3. The smart heating cloud platform can directly add heating customers through the front-end webpage, with convenient and fast operation, sorted by number, and the order of customer arrangement can be freely adjusted; Provide detailed information on thermal units, establish maintenance information for measuring equipment, and facilitate management personnel to query the history and current status of instruments; 4. Automatically generate daily, monthly, annual, and report forms, and be able to print reports in real time. Reports can be made according to the requirements of the thermal company. 5. Thermal user management data system, including flow rate, pressure, temperature, upper and lower limit report settings, instrument current operating parameters, unit price, special policies, responsible person information, etc., to prevent users from modifying settings; 6. Multi level operation permissions for STR steam metering station are set and controlled by administrators to prevent unauthorized operations by personnel at different levels;

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdSmart Heating Cloud PlatformEquipped with RS232/RS485 standard communication interface and MODBUS RTU, MODBUS ASC Ⅱ industrial standard communication protocol, it can communicate with intelligent flow meters, read various measurement parameters and working parameters in intelligent flow meters.

　　1. The device has automatic dialing and disconnection redialing functions. When the network condition is unstable, it has the ability to automatically restore communication, ensuring stable system operation without human intervention; When the signal in the area is weak, the module can communicate normally by changing the signal reception and transmission strength of the module.

　　2. Online query function can be achieved through the Internet, and users only need to provide their username and password. The real-time online query function can be completed.

　　3. Equipped with data cable and 12VDC power supply.Smart heating cloud platform, steam recharge for heating network, intelligent heating network designValve closing function: After the purchased steam is used up, the valve will automatically close. The valve closing action can be set according to the actual situation, such as closing 50%, 40%, or 30%, and the specific value is set by the user themselves. Power outage protection function: The original data can be saved for ten years during a power outage. In order to improve meter reading efficiency, meter reading performance, reduce meter reading workload, save manpower, material resources, and financial resources, and enhance the role of electricity management and inspection, the system's intelligence and technology can be fully utilized to prevent steam theft and detect abnormal operating conditions. If there is a gas flow meter on site, our flow integrator does not need to be used. Only the on-site flow meter needs to have RS485 communication function. Based on the communication protocol of the meter, we have developed communication software and directly connected it to the IC card controller with RS485 line

Smart heating cloud platform, steam recharge for heating network, intelligent heating network designA remote meter reading system based on low-power Internet of Things, comprising a terminal meter reading node, a centralized procurement node, a cloud server, a centralized meter reading management platform, and user terminals. The terminal meter reading node of the smart heating cloud platform collects user meter data, sends the data packet to the centralized acquisition node, the centralized acquisition node and the terminal meter reading node establish a one to many communication mode, and wirelessly transmits the data collected by multiple terminal meter reading nodes to the cloud server. The centralized reading management platform connects the cloud server through the Internet, processes the data collected by the terminal meter reading node, and sends instructions according to the status of the terminal meter reading node. The terminal meter reading node sets a wake-up mechanism, receives instructions and controls the data acquisition module and communication module responses through its main control module. Users can receive payment reminders and view water/electricity/gas/heat information based on the user terminal. Data management function: Data browsing: historical data can be browsed separately and can be deleted, queried, and printed. For example, information stored in the database can be browsed, such as meter readings, statistical data, curve data, event data, etc. These data can be exported into corresponding reports for printing. Buy before use, close valves for overdue payments, and avoid the traditional "supply first, charge later" energy management mode. Modern energy management reform is trendy, and display functions include instantaneous flow rate, cumulative flow rate, remaining gas volume, differential pressure or frequency, pressure, temperature, valve position, etc. Prompt function: When the IC card is used incorrectly (when the IC card function does not match the operation being performed), the LCD screen displays a prompt message, and the operation is invalid

　　Qingdao Hesheng Zhiyuan Automation System Co., Ltd

　　189 Hui Xin 5483 Same number 1481

　　Q：3438-5007-67

AfterSalesService :

• Smart Heating Cloud Platform