Prepaid system management software, heating enterprise recharge, analysis of smart heating network management software

Description :

　　Distributed energy systems, as energy supply centers serving the local area, directly face the needs of local users and are deployed near them. This simplifies the energy transmission process for users, reducing energy losses and transmission costs, and increasing the safety of energy supply for users. Due to its lack of large-scale and long-distance energy output mode, it mainly targets the energy needs of local users,Prepaid system management softwareThe scale will be constrained by user demand, and compared to traditional centralized energy supply systems, it is of medium to small capacity. According to the actual situation where various meters are relatively concentrated, the low-level network of the system adopts RS485 bus. It has the characteristics of simple structure, low cost, and low wiring requirements. The remote meter reading system software transmits commands to the on-site instruments, so that the data of each instrument is transmitted to the corresponding data acquisition module through the RS-485 interface. The data acquisition module automatically reads various data information from each meter according to the meter reading task issued by the management center, such as pressure, temperature, flow rate, power outage information, hour, day, month data, etc. Moreover, the remote transmission distance can reach 1200 meters, which can reliably meet the needs of low-level data acquisition and transmission. At the same time, it also helps to reduce the distributed capacitance generated between the two 485 communication lines and the data generated from around the communication lines

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdPrepaid system management software, heating enterprise recharge, analysis of smart heating network management softwareMeaning: In the context of vigorously building a smart city and promoting the development of "Internet plus" smart energy, the concept of smart heating came into being as an important branch of the energy industry. existingBoiler steam charging managementThere are still some issues during operation, such as insufficient remote points, relatively outdated control technology, high energy consumption, and low energy metering. Urban heating belongs to the main content of energy conservation and emission reduction. The development of contemporary heating systems must effectively combine traditional engineering with modern data science and technology, and improve the effectiveness of energy efficiency management by predicting the operation status of the heating network. The design of heating systems is often driven by demand, and predicting the demand for heat load on the consumer side plays a crucial role in improving the overall efficiency of the heating network operation.

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdPrepaid system management softwareSystem Introduction:

　　1. Establishment of a prepaid steam metering management center;

　　2. Installation, commissioning, and data transmission of 100 sets of prepaid steam metering equipment;

　　3. The hot water prepayment system has opened 100 remote metering points, with N metering points used in the first phase. The excess will be reserved for future expansion;

　　4. According to the steam parameters provided by Party A, the rated pressure is 2.5Mpa, the upper temperature limit is 320 ℃, the working pressure is 1.2Mpa, and the working temperature is 300 ℃. This data is an important parameter for us to choose a flow meter.

　　5. The IC card steam prepayment system has an active call function: it can extract data from monitoring points on the server of the dispatch center at any time. The traditional meter reading method uses a pure manual reading mode during the meter reading process, while the final cost measurement result in the later stage is also a manual mode. The wireless remote intelligent meter reading system is built on the network of the GPRS data management center established within the enterprise, and transmits all incoming traffic data to the data center through a mobile GPRS network

Prepaid system management software, heating enterprise recharge, analysis of smart heating network management softwareMore and more attention is being paid to heating enterprises. By using remote monitoring to track the entire heating network pipeline and instruments, not only can the heating status of the entire heating network pipeline be grasped, but also the instrument fault report information can be quickly and accurately reflected, making it convenient for maintenance personnel to check and repair in a timely manner. This not only saves a lot of manpower and material resources, but also improves the modern management level of the heating network. If the remote network is complete, the meter reading personnel can also serve as personnel. If any problems are found in the room, they can go to check at any time to reduce the possibility of gas theft and create a deterrent effect on users, so that they do not want to steal gas, thereby reducing the losses of the gas supply enterprise.

　　Qingdao Hesheng Zhiyuan Automation System Co., Ltd

　　189 Hui Xin 5483 Same number 1481

　　Q：3438-5007-67

AfterSalesService :

• Prepaid system management software