Heating metering and charging software, online monitoring of superheated steam, intelligent heating network technology for thermal power plants

Description :

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdHeating metering and charging softwareSystem Introduction:

　　1. Establishment of a prepaid steam metering management center;

　　2. Installation, commissioning, and data transmission of 100 sets of prepaid steam metering equipment;

　　3. The smart heating network of the thermal power plant has opened 100 remote metering points, with N metering points used in the first phase, and the excess part reserved for future expansion preparation;

　　4. According to the steam parameters provided by Party A, the rated pressure is 2.5Mpa, the upper temperature limit is 320 ℃, the working pressure is 1.2Mpa, and the working temperature is 300 ℃. This data is an important parameter for us to choose a flow meter.

　　5. As is well known, the traditional meter reading method for IC card prepaid metering boxes uses manual reading of hot water and steam meter values, and calculates the actual usage and cost situation of each user after statistics. However, the intelligent meter reading system no longer relies on manual reading, and calculates the usage and cost of hot water and steam meters through the meter reading system. The data transmission of the high-level network adopts fiber optic transmission with good compatibility, high reliability, fast data transmission speed, and long transmission distance

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdHeating metering and charging software, online monitoring of superheated steam, intelligent heating network technology for thermal power plantsReport function: When the remaining balance is insufficient, the system automatically reports in both directions. The system automatically reports when unpacking. After the power supply is cut off, the system automatically reports in both directions. At the same time, the built-in UPS power supply continues to provide power, and the measurement will not be interrupted after a power outage; Upload valve position, flow rate and other data, and the upper computer can set the reporting method arbitrarily. You can also choose to send it. It has an overdraft function, and the overdraft amount will be deducted immediately during the next recharge (this function has permission restrictions); The system can set the valve opening, automatically control the size of the valve, ensure that the flow rate does not exceed the limit, and measure; And upload the actual valve opening in real-time; Simultaneously equipped with a heating function to prevent steam from impacting the pipeline. Lightning protection function: The box machine is equipped with a lightning protection module, but the control box must be reliably grounded. Convenient recharge: When the recharge software writes an IC card, there is no need to manually convert it into gas volume. Simply enter the amount and the software will automatically calculate the gas volume based on the unit. Price management: Different gas prices can be set in the recharge software according to different users, and can be modified at any time.

　　The main functions of Qingdao Hesheng Smart Heating Network include prepaid management, collection of user data, and; Realize the practice of recharging and paying before using steam, reducing financial risks and improving capital turnover. Geographic information display of heating network: Display heating network pipelines, thermal user locations, thermal user parameters and basic information, heating pipeline data, etc. on the map. Intelligent inspection: inspection tasks and route planning; Fault reporting, timely detection and handling of faults to reduce pipe damage; Effectively monitor the completion rate of inspections. Pipeline safety monitoring: pipeline video; Pipeline leakage monitoring and management; Pipeline displacement and temperature and pressure monitoring; Effective monitoring, data analysis, and reporting to ensure the safe operation of the pipeline network. Equipment management: Equipment ledger management; View device data by scanning the QR code on the device; Management of equipment inspection cycle, warranty period, etc; Statistical analysis of maintenance and repair records. Intelligent analysis: pipe loss analysis, peak and valley consumption analysis, etc; Year on year and month on month analysis of gas supply and sales volume; Conduct statistical analysis based on the hot user industry, steam usage characteristics, etc.

Heating metering and charging software, online monitoring of superheated steam, intelligent heating network technology for thermal power plantsIt combines computer technology, sensor technology, data communication technology, and incorporates prepaid management functions. This prepaid management system is mainly used for monitoring and managing the metering systems of various heat users in industrial parks. It uses the GPRS wireless network platform to send the parameters of each heat network user in the park to the data database on the heat network server in the heat network center through secondary instruments and wireless measurement and control communication modules. And through software, real-time monitoring of user data in the heating network is carried out, with functions such as reporting reminders, trend recording, report statistical analysis, remote recharging, and real-time control of remote electric valves for overdue payments. It assists heating network dispatch and maintenance personnel in ensuring the safety, stability, and energy-saving operation of the heating network, which is a basic prepaid system for remote meter reading in the heating network. If the IC card prepaid integrator has a gas flow meter on site, our flow integrator does not need to be used. Only the on-site flow meter needs to have RS485 communication function. We will develop communication software based on the communication protocol of the meter and directly connect it to the IC card controller through RS485 line. System maintenance includes communication settings, site settings, instrument settings, range settings, option settings, user management, permission settings, data initialization, password change, network settings, and other functions. The network settings are as follows: Users can make corresponding settings and changes according to their own company's actual situation. The report function: automatically generates * *, monthly reports, annual reports, and can also perform statistical reports and printing at any time. Automatic printing function can be set

　　Qingdao Hesheng Zhiyuan Automation System Co., Ltd

　　189 Hui Xin 5483 Same number 1481

　　Q：3438-5007-67

AfterSalesService :

• Heating metering and charging software