Steam meter reading system terminal, intelligent heating network data collection, hot water prepayment system design

Description :

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdSteam meter reading system terminalSystem Introduction:

　　1. Establishment of a prepaid steam metering management center;

　　2. Installation, commissioning, and data transmission of 100 sets of prepaid steam metering equipment;

　　3. The hot water meter reading system has opened 100 remote metering points, with N metering points used in the first phase. The excess points will be reserved for future expansion;

　　4. According to the steam parameters provided by Party A, the rated pressure is 2.5Mpa, the upper temperature limit is 320 ℃, the working pressure is 1.2Mpa, and the working temperature is 300 ℃. This data is an important parameter for us to choose a flow meter.

　　5. Prepaid system collection terminal communication function: Provides RS485 communication interface, which can be connected through wired, GPRS/CDMA and other methods, using standard Modbus RTU protocol. Therefore, gradually establishing remote meter reading and systems in cities, and using technological means to improve the measurement and management level of hot water, steam, tap water, gas, etc. has become a consensus among people

Steam meter reading system terminal, intelligent heating network data collection, hot water prepayment system designIt can also provide the user unit with greater regulation, control, and guarantee capabilities, ensuring that various secondary energy sources of the user unit can be fully supplied. It is very suitable for providing electricity, heating, and cooling to developing areas, commercial and residential areas, rural areas, pastoral areas, and mountainous areas, greatly reducing environmental pressure. In short, distributed energy systems can meet the needs of special occasions, provide possibilities for the comprehensive cascade utilization of energy, open up new directions for the utilization of renewable energy, and make outstanding contributions to improving energy utilization efficiency, enhancing safety, and addressing environmental pollution. This is also a very important advantage. The development of terminal technology for steam meter reading systems has led to an increasing application of automation in work. With the continuous development of enterprises and the increasing number of various meters, traditional manual meter reading can no longer meet the requirements of modern enterprises, and is gradually being replaced by RS485 wired data remote meter reading systems. In order to improve meter reading efficiency, meter reading performance, reduce meter reading workload, save manpower, material resources, and financial resources, enhance the role of electricity management and inspection, fully utilize the intelligence and technology of the system, prevent steam theft and detect abnormal operating conditions

　　Meaning of smart heating and smart heating of Qingdao Hesheng Zhiyuan Automation System Co., Ltd.: In the context of building a smart city and promoting the development of "Internet plus" smart energy, the concept of smart heating came into being as an important branch of the energy industry. existingSteam meter reading system terminalThere are still some issues during operation, such as insufficient remote points, relatively outdated control technology, high energy consumption, and low energy metering. Urban heating belongs to the main content of energy conservation and emission reduction. The development of contemporary heating systems must effectively combine traditional engineering with modern data science and technology, and improve the effectiveness of energy efficiency management by predicting the operation status of the heating network. The design of heating systems is often driven by demand, and predicting the demand for heat load on the consumer side plays a crucial role in improving the overall efficiency of the heating network operation.

　　Distributed energy management system is relative to traditional centralized energy supply systems. Traditional centralized energy supply systems use large capacity equipment, centralized production, and then transmit various types of energy to numerous users over a large area through door transmission facilities (such as large power grids, large heat grids, etc.); Distributed energy systems, on the other hand, are small and medium-sized energy conversion and utilization systems that directly face users, produce and supply energy on-site according to their needs, have multiple functions, and can meet multiple objectives.Steam meter reading system terminalThe wireless remote intelligent meter reading system is built on the network of the GPRS data management center established within the enterprise. Through the mobile GPRS network, all incoming traffic data is transmitted to the data center. The GPRS wireless data remote meter reading system is designed and developed by our company to solve the above problems. It ensures the safe operation of the heating network system, facilitates the reasonable allocation of energy, is economical and practical, and can detect problems in a timely manner to reduce losses. The phenomenon of "confusion of gas (water)" has taken the heating network management to a higher level, achieving the goal of seeking benefits from management

　　Qingdao Hesheng Zhiyuan Automation System Co., Ltd

　　189 Hui Xin 5483 Same number 1481

　　Q：3438-5007-67

AfterSalesService :

• Steam meter reading system terminal