Pre paid water supply system for the park, self provided power plant valve control system, and intelligent heating network management platform

Description :

At present, most heating companies supply steam first and then settle monthly when selling steam, but this may result in some user units defaulting on steam payments, causing inconvenience to heating companies. The steam IC card prepayment control system developed by Qingdao Hesheng Company can effectively eliminate the above-mentioned problems. The steam users of this system must pay in advance and recharge before opening the valve to use steam. They must also renew and recharge before the balance is exhausted. When the balance is insufficient, local and remote notifications will be sent to remind users to pay in a timely manner. If the balance is not renewed in time, the system will automatically close the valve and stop steam when the balance is zero, eliminating the phenomenon of overdue payment by the steam users. combinePre payment system for water supply in the parkReal time customer gas usage status, the system control box has unboxing and disconnection reports. Once a customer opens the metering box or system control box without authorization, the data will be immediately transmitted to the control center to remind the staff of the time, and the electric valve will be remotely controlled to close and stop the steam supply, which will have a deterrent effect on malicious behavior by users.

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdPre paid water supply system for the park, self provided power plant valve control system, and intelligent heating network management platformtrain:

　　1. On site training: During the implementation of the project, the client must assign technical personnel to participate in the construction and operation debugging of the project. Our company's engineering and technical personnel will provide on-site guidance and practical training for your company's personnel during implementation, ensuring that the progress of the project is synchronized with personnel training. Before the system trial run, we will provide system training to the customer. Through training, the customer's operational staff will understand the basic principles and learn system operation and maintenance, including a basic understanding of the software and hardware systems of this project. The training content is as follows: a. Basic knowledge and system configuration of the system, b. Courses on system installation, inspection, troubleshooting, online coordination and maintenance, and application training of human-machine interface. 2. Factory training: Our company conducts regular training for technical personnel of users who use our products every year. At that time, we will provide in-depth explanations of the company's software, hardware, and heating network technology, and conduct on-site practice according to the conditions. At the same time, we will answer any questions that users may have in various systems.

　　3Pre payment system for water supply in the parkGas purchase, hot recharge, card insertion, inquiry, IC card technology, all in one go, easy to handle, transforming charging from tedious manual meter reading and pricing in the past to user card purchase of gas and heat, realizing the automation of gas and heating fee collection and management process. System maintenance: communication settings, site settings, instrument settings, range settings, option settings, user management, permission settings, data initialization, password change, network settings and other functions. The network settings are as follows: Users can make corresponding settings and changes according to their own company's actual situation. In the late 1980s and early 1990s, the pilot work of automated meter reading system began. Various power supply enterprises across the country have basically established wireless power load control systems. Although their main construction purpose is to control loads, they are gradually being used for reading electricity meters for large users

　　Qingdao Hesheng Zhiyuan Automation System Co., LtdPre paid water supply system for the park, self provided power plant valve control system, and intelligent heating network management platformReport function: When the remaining balance is insufficient, the system automatically reports in both directions. The system automatically reports when unpacking. After the power supply is cut off, the system automatically reports in both directions. At the same time, the built-in UPS power supply continues to provide power, and the measurement will not be interrupted after a power outage; Upload valve position, flow rate and other data, and the upper computer can set the reporting method arbitrarily. You can also choose to send it. It has an overdraft function, and the overdraft amount will be deducted immediately during the next recharge (this function has permission restrictions); The system can set the valve opening, automatically control the size of the valve, ensure that the flow rate does not exceed the limit, and measure; And upload the actual valve opening in real-time; Simultaneously equipped with a heating function to prevent steam from impacting the pipeline. Lightning protection function: The box machine is equipped with a lightning protection module, but the control box must be reliably grounded. Convenient recharge: When the recharge software writes an IC card, there is no need to manually convert it into gas volume. Simply enter the amount and the software will automatically calculate the gas volume based on the unit. Price management: Different gas prices can be set in the recharge software according to different users, and can be modified at any time.

　　becausePre payment system for water supply in the parkThere is a significant time delay in heat transfer during operation. By predicting the load of the heat production unit, appropriate adjustments can be made to the heat production plan based on the specific heat needs of the network, thereby improving the thermal efficiency of the entire heating network system. The steam smart heating network system is a new type of heating network composed of a heating physical equipment network (a network composed of heat sources, heating networks, user systems, local display instruments, and control and regulation devices), a heating information Internet of Things (a network composed of sensors, data collection devices, data transmission devices, etc.), and an intelligent decision-making system based on an intelligent heating platform. Intelligent heating is based on the heating physical equipment network and supported by the heating information Internet of Things. Through an intelligent decision-making system, it provides auxiliary decision-making support for operation and management personnel, forming a heating system form that reduces operating energy consumption while ensuring indoor comfort.

　　Qingdao Hesheng Zhiyuan Automation System Co., Ltd

　　189 Hui Xin 5483 Same number 1481

　　Q：3438-5007-67

AfterSalesService :

• Pre payment system for water supply in the park